Wilton® WL9-11754 Angle Cradle Drill Press Vise, 7-1/4 in L 4-1/2 in H, 4 in Jaw Opening, Cast Iron
The cradle style drill press vise is designed for angled drilling and tapping applications. All boast hardened v-grooved jaws for clamping round objects vertically and horizontally. Backed by Wilton's lifetime warranty.
-
BrandWilton®
-
UPC662755100468
-
Manufacturer Part NumberWL9-11754
-
CountryUSA
-
MaterialCast Iron
-
Throat Depth1-1/2 in
-
TypeAngle Cradle
-
Base Length6-1/2 in
-
Base TypeStationary
-
Base Width6-1/2 in
-
Jaw MaterialSteel
-
Jaw Opening4 in
-
Jaw TypeV-Groove
-
Jaw Width4 in
-
Overall Height4-1/2 in
-
Overall Length7-1/4 in
- All boast hardened V-grooved jaws for clamping round objects vertically and horizontally
- Designed for applications including drilling, tapping and reaming requiring angle setup
- Cradle design with 90 deg vertical indexing, scaled in 1 deg increments
- Side tommy bar allows secure locking at any increment from 0 - 90 deg
- Pin hard stops at 0 deg, 15 deg, 30 deg, 45 deg, 60 deg, 75 deg and 90 deg for common applications
- Durable construction with fine grain cast iron castings and hardened smear vise jaws
- Black oxide coated screw provides consistent clamping pressure and durability
- Highly accurate with beds and bases parallel to plus/minus 0.001 in
- Base has four 1/2 in shoulder slots for quick, easy positioning on the machine table
- Cast iron is a heavy material that is malleable and extremely strong
- 10.50 in width
-
Alternative Part Number11754
-
UNSPSC27112157
-
WarrantyLifetime
-
Catalog
Recently Viewed
Wilton® WL9-11754 Angle Cradle Drill Press Vise, 7-1/4 in L 4-1/2 in H, 4 in Jaw Opening, Cast Iron
The cradle style drill press vise is designed for angled drilling and tapping applications. All boast hardened v-grooved jaws for clamping round objects vertically and horizontally. Backed by Wilton's lifetime warranty.
Drillco 75A120C 7500 Center Cutting Double End Imperial Stub Length Finishing End Mill, 5/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Bright
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
HCI Preferred Supplier 38108 90 deg Tube-to-Pipe Elbow, 3/4 x 1/2 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
HCI Preferred Supplier 38108 90 deg Tube-to-Pipe Elbow, 3/4 x 1/2 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
HCI Preferred Supplier 38107 90 deg Tube-to-Pipe Elbow, 5/8 x 1/2 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
HCI Preferred Supplier 38107 90 deg Tube-to-Pipe Elbow, 5/8 x 1/2 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
Irwin® Record® 2026303 Bench Vise, 4 in Jaw Opening, 4-1/2 in W Steel Jaw, 2-3/8 in D Throat
Irwin® Record® vises are built to handle any job. The impressive, versatile line of vises from Irwin® is designed with the most sought-after features to fit every application, from the garage workbench to the factory floor. Whether used for cutting, screwing, drilling, planning, sanding or just holding, there is an Irwin® Record® vise that's perfect for the any type of holding application. Designed and manufactured to the highest standards and built with the best available materials, Irwin® Record® vises are available in a variety of styles, jaw widths, jaw capacities, base types and clamping forces. Refer to the chart below to select the best vise for the job.
Drillco 72A120C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 5/16 in Dia Cutter, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Bright
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
