Proto Tools 0"-6" DP THROAT C-CLAMP--USE J406A
Proto® J406 Deep Throat Standard Duty C-Clamp, 3-5/8 in D Throat, 6 in Clamping, 0 to 6 in Jaw Opening, 3/4 in Screw
-
BrandProto®
-
UPC662679480288
-
Manufacturer Part NumberJ406
-
CountryUSA
-
Throat Depth3-5/8 in
-
Clamping Capacity6 in
-
Clamping Pressure6600 lb
-
TypeDeep Throat Standard Duty
-
Screw Size3/4 in
-
Anvil TypeFlat
-
Jaw Opening0 to 6 in
-
Body MaterialForged Steel
- Standard service, deep throat style is the most versatile and popular
- Hot forged for strength and hard use
- Forcing screw has heavy rolled acme thread allowing the screw to turn easily under pressure and is less susceptible to damage
- Forcing screw has a sliding T-handle and an impact resistant pad
- Smooth body finish
- Black color
- Full length screw type
-
UNSPSC27112120
-
Standards/ApprovalsCID A-A-429C
Recently Viewed
Proto® J406 Deep Throat Standard Duty C-Clamp, 3-5/8 in D Throat, 6 in Clamping, 0 to 6 in Jaw Opening, 3/4 in Screw
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
48" X 120" X 1/4" BLACK UHMW SHEET
Red Devil® 0326 Paint Varnish Removal Steel Wool, 3 Coarse Steel Wool
Caged roller followers provide large internal grease storage capacity for applications where relubrication is infrequent. Cage guided rollers and a very heavy outer ring cross section permit operation at high loads and high speeds. Caged roller followers are avail able with and with out seals. The unsealed design provides the additional advantages of very low friction to prevent skidding in lightly loaded applications and provides for flow-through lubrication. Caged roller followers normally mount directly on a hardened and ground pin. RBC® offers a line of Precision Ground Inner Rings to simplify application of caged roller followers.
TIE ROD ANCHOR B7 3/4" X 16"-NBS9280751600B7 >
