LPS® 02701 Precision Clean Multi-Purpose Degreaser, 1 gal Bottle, Liquid, Turquoise/Greenish Blue, Citrus
-
BrandLPS®
-
UPC078827027012
-
Manufacturer Part Number02701
-
CountryUSA|Canada
-
FormLiquid
-
ColorTurquoise/Greenish Blue
-
TypeMulti-Purpose
-
CompositionDipropylene Glycol Monomethyl Ether, Silicic Acid, Di-Sodium Salt, Tetrapotassium Pyrophosphate, Tripropylene Glycol Methyl Ether
-
VOC Content6.1%, 63 g/L, 0.53 lb/gal
-
Container Size1 gal
-
Container TypeBottle
-
Net Weight1 gal
-
SeriesPrecision Clean
-
pH Range13
-
Specific Gravity1.05 to 1.09
-
Odor/ScentCitrus
- Super industrial strength removes tough stains and soils
- Water-based and biodegradable
- Does not contain butyl, chlorinated or petroleum solvents, bleach, ammonia, or abrasives
- Alkaline formula inhibits flash rusting
- Rinses clean
- Safe on all surfaces except magnesium
- Low VOCs and no chlorinated solvents
- Non-flammable
- <3 cSt viscosity
- 32 - 212 deg F temperature range
- 212 deg F initial boiling point
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | LJ6002701 |
| Berkshire eSupply | LJ6002701 |
-
UNSPSC47131821
-
Package Description1/PK
-
Standards/ApprovalsNSF® C1 Certified|Meets California Air Resources Board (CARB) VOC regulations for consumer products|Meets 2006 Ozone Transport Commission (OTC) model rules for consumer products|1/0/0 HMIS|HMIS III|NFPA|2009/08/25 CFIA Standard
Recently Viewed
Dodge® 131841 208 Normal Duty Pillow Block Ball Bearing Unit, 1-1/2 in Dia Bore, 5.18 to 5.88 in L Bolt Center-to-Center, 1.94 in Base to Bore Centerline, 7-1/4 in OAL x 4 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
7" 50# NATURAL CABLE TIES--100 PER PACKAGE-JWH514651 >
Sealmaster® 700866 TB Series Standard-Duty Pillow Block Ball Bearing Unit, 3/4 in Dia Bore, 2 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 3-1/8 in OAL x 2-9/16 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster® 700577 NPL Standard-Duty Pillow Block Ball Bearing Unit, 1-1/4 in Dia Bore, 4-11/16 to 5-5/16 in L Bolt Center-to-Center, 1-13/16 in Base to Bore Centerline, 6-9/16 in OAL x 3-11/16 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster® 700984 SPM Medium Duty High Base Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 5-5/8 to 6-7/8 in L Bolt Center-to-Center, 2-3/8 in Base to Bore Centerline, 8-1/4 in OAL x 4-1/2 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
