Browning 10-TOOTH MPB #35 CHAIN SPROCKETS BRW 35-B-10
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
-
BrandBrowning®
-
UPC662289198467
-
Manufacturer Part Number1121565
-
CountryUSA
-
Pitch3/8 in
-
Pitch Diameter1.214 in
-
MaterialSteel
-
Chain Size#35
-
TypeSingle Strand Minimum Bore Type B
-
Hub Diameter31/32 in
-
Number of Teeth10
-
Keyway Size1/8 x 1/16 in
-
Outside Diameter1.37 in
-
Length Through Bore49/64 in
-
Bore Diameter3/8 in
- Larger hub diameter allows larger bore capacity
- Lasts longer than sprockets made from low carbon steel
- Maximum bore shown will accommodate standard keyways and setscrews over keyway
- Slightly larger bores are possible with no keyway, shallow keyway or setscrew at angle to keyway
- Hub projection on one side
- High quality, high carbon steel
- For use with 3/8 in pitch ANSI chain
-
Alternative Part Number35B10
-
UNSPSC31171900
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified
-
Warranty1 Year
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
Dodge® 023151 115 Non-Expansion Type E-Xtra Triple Lip Top Angle Take-Up Tapered Roller Bearing, 1-15/16 in Dia Bore, 6-1/2 in L x 3-1/2 in W x 6.38 in H, 9300 lb Dynamic/43000 lb Static Load
Type E-Xtra, Type K, double-interlock, TAF and EXL mounted bearings are all general purpose high capacity tapered roller bearings capable of handling any combination of radial and thrust load within the capacity of the bearing. All of these bearings are mounted to the shaft by means of set screw collars having 65 deg set screw spacing for optimum clamping force. The Type E-Xtra, double-interlock, TAF and EXL mounted bearings have locking collars at each end of their extended inner races. Type K has a single locking collar. The tapered roller bearings for these mounted bearings all have case carburized inner races (cones), outer races (cups) and rollers. Bearings are preassembled, prelubricated and factory adjusted. They are normally equipped with land riding contact type seals with a metal deflector guard.
Browning #120 OFFSET CHAIN CONNECTING LINKS BRW 120-O/S-C/L
Browning® 1298033 Offset Link, 120 Chain, 1-1/2 in Pitch, 1.96 in OAW, 0.437 in Dia Pin
Apex® 320-MX Power Drive Bit, 6F-8R Slotted Point, 3-3/4 in OAL, Steel
30" PLASTIC EASY LEAF BAGGER-JWH716847 >
Blackburn® ADR11 Type ADR-ALCUL Dual-Rated Mechanical Lugs, 14 to 1/0 AWG Conductor Aluminum/Stranded Copper Conductor, 1/4 in Stud, 1 Bolt Holes
Blackburn® cast, forged or formed mechanical connections, produced in economical copper and dual-rated aluminum, provide unequaled variety with a large variety of UL and CSA certified solutions for your electrical interface needs.
