Browning® 3748894 Taper Lock Bushing, 7/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
Browning® 3748894 Taper Lock Bushing, 7/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
-
BrandBrowning®
-
UPC662289612437
-
Manufacturer Part Number3748894
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating4300 in-lb
-
Screw Size3/8 x 5/8 in
-
Number of Bolt Holes2
-
Barrel Diameter2-1/4 in
-
Keyway Size3/16 x 3/32 in
-
Bolt Circle Diameter2-1/8 in
-
Bore Diameter7/8 in
-
Overall Length1 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
-
Alternative Part Number1610X7/8
-
UNSPSC31163205
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Browning® 3748894 Taper Lock Bushing, 7/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
Browning® 3748894 Taper Lock Bushing, 7/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
Energizer® 392BPZ Non-Rechargeable Coin Battery, Silver Oxide, 1.55 V Nominal, 44 mAh Nominal, 392
Energizer® 392BPZ Non-Rechargeable Coin Battery, Silver Oxide, 1.55 V Nominal, 44 mAh Nominal, 392
3/4"-ID NEEDLE BEARING-INANCS1216>
V-BELTOUTSIDE CIRCUMFERENCE 212."-JAS5V2120 >
GRAY SQUARED SAFETY GLASSES, CONTEMPORARY, INCREDIBLY LIGHT, ALL AROUND IMPACT PROTECTION, SOFT FLEXIBLE NOSEPIECE & RUBBER TEMPLES PROVIDEEX TRA COMFORT-GSI4483 >
DuMONT Minute Man® replacement shims for use with Keyway Broaches are available for spares and to replace lost or damaged shims. The smallest Broaches cut in one pass and require no shim. Multiple pass Keyway Broaches are furnished with all necessary shims unless otherwise noted. Progressive shims may be purchased for use with our largest Keyway Broaches. A shim is required to compensate for the thickness removed following a Keyway Broach's cutting pass. The addition of a shim serves to move the Broach forward towards its standard finished cutting depth. Subsequent passes require the stacking of shims. Replacement or extra shims are provided in shim sets corresponding to the Broach size and letter designation in the quantity necessary to cut to standard depth. Please specify EDP number when ordering replacement or extra shims.
