Dodge® 117714 Stock Bore Taper Lock Bushing, 4-1/8 in Dia Bore, 5-3/4 in Dia Barrel, 4 in OAL, Ductile Iron
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475427154
-
Manufacturer Part Number117714
-
CountryUSA
-
Taper8 deg
-
MaterialDuctile Iron
-
Torque Rating77300 in-lb
-
TypeStock Bore
-
Screw Size5/8 x 1-3/4 in
-
Number of Bolt Holes3
-
Hub Diameter8-1/2 in
-
Barrel Diameter5-3/4 in
-
Keyway Size1 x 1/4 in
-
Bolt Circle Diameter5.54 in
-
Bore Diameter4-1/8 in
-
Overall Length4 in
- Size 4040 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number4040 X 4-1/8-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Warranty Information
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Dodge® 117714 Stock Bore Taper Lock Bushing, 4-1/8 in Dia Bore, 5-3/4 in Dia Barrel, 4 in OAL, Ductile Iron
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Browning® 3749256 Taper Lock Bushing, 3/4 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
Browning® 3749256 Taper Lock Bushing, 3/4 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
Browning® 3748506 Taper Lock Bushing, 3/4 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Browning® 3748506 Taper Lock Bushing, 3/4 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Browning® 1296342 Automatic Torque Limiter, 3/4 in Straight Bore, 2-1/2 in OD, 800 in-lb (1 Spring)/1100 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
GP® 1213D Deep Length Socket Set, Imperial, 6 Points, 3/8 in, 12 Pieces, Molded Storage Case Container
GP® 1213D Deep Length Socket Set, Imperial, 6 Points, 3/8 in, 12 Pieces, Molded Storage Case Container
1/2" X 144" Square Plain Keystock
