Browning 1"-ID 1108-STYLE TL BUSHINGS BRW 1108 X 1
Browning® 3748548 Taper Lock Bushing, 1 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
-
BrandBrowning®
-
UPC662289610808
-
Manufacturer Part Number3748548
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating1300 in-lb
-
Screw Size1/4 x 1/2 in
-
Number of Bolt Holes2
-
Barrel Diameter1.511 in
-
Keyway Size1/4 x 1/8 in
-
Bolt Circle Diameter1-29/64 in
-
Bore Diameter1 in
-
Overall Length7/8 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
- Size 1108 bushing
- Mounts flush in products no protruding flanges to interfere with the drive
- Key to key drive cap screws act as an external key
- 1-1/2 in/ft taper on barrel since this is a non-self locking taper it provides ease of installation and removal of products from the shaft
-
Alternative Part Number1108X1
-
UNSPSC31163205
-
Package Description1/PK
-
Warranty1 Year
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Browning® 3748548 Taper Lock Bushing, 1 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Koyo IR-2020 Inch Series Regular Width Inner Ring, 1-1/4 in ID x 1-1/2 in OD, 1.265 in OAW, For Use With B-268, B-2610, B-2616, J-2610, J-2616, M-26161, M-26101 Drawn Cup Needle Roller Bearing, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
Jacobs® 3605 L-Handle Chuck Key, 1/4 in Dia Pilot, Key Number: KGA, For Use With 1/4 in and 3/8 in Multi-Craft® Chucks, Soft Steel
Jacobs® 3605 L-Handle Chuck Key, 1/4 in Dia Pilot, Key Number: KGA, For Use With 1/4 in and 3/8 in Multi-Craft® Chucks, Soft Steel
10-MM X 1.25X50-MM HEX HEAD CAPSCREW-MET96010050F >
Pyramex® S7510SJ Lightweight Safety Eyewear, Anti-Scratch, Clear Lens, Black, Plastic Frame, Polycarbonate Lens, ANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
1-1/2-SS-PIPE 1-1/2" 304 Heavy Duty Schedule 40 Stainless Steel; Plain End Pipe. Sold By
1-1/2" 304 HEAVY DUTY SCHEDULE 40 STAINLESS STEEL; PLAIN END PIPE. SOLD BY THE FOOT-FIT11/2SSPIPE >

