Dodge® 117151 Stock Bore Taper Lock Bushing, 1 in Dia Bore, 1.39 in Dia Barrel, 0.87 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475488056
-
Manufacturer Part Number117151
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating1200 in-lb
-
TypeStock Bore
-
Screw Size1/4 x 1/2 in
-
Number of Bolt Holes2
-
Hub Diameter1.94 in
-
Barrel Diameter1.39 in
-
Keyway Size1/4 x 1/16 in
-
Bolt Circle Diameter1.33 in
-
Bore Diameter1 in
-
Overall Length0.87 in
- Size 1008 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number1008 X 1-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Catalog
-
Specification Sheet
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Dodge® 117151 Stock Bore Taper Lock Bushing, 1 in Dia Bore, 1.39 in Dia Barrel, 0.87 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Dodge® 124460 204 Normal Duty Pillow Block Ball Bearing Unit, 1/2 in Dia Bore, 2 in L Bolt Center-to-Center, 1.31 in Base to Bore Centerline, 2.88 in OAL x 2.56 in OAH
A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.
5-GRV 5-V-BELT QD SK-BUSH SHEAVES IDC 5/5-V-0590-SK
5-GROOVE 5-V-BELT QD SK-BUSHING SHEAVE
PROJECTOR BULB
MORSE® 43276 1895 Double End Non-Center Cutting Regular Length End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
Gates® Power Transmission PowerGrip® HTD® 475-5M-09 Synchronous Belt, 9 mm W, 475 mm OAL, 5 mm Pitch, 95 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
