Dodge® 124460 204 Normal Duty Pillow Block Ball Bearing Unit, 1/2 in Dia Bore, 2 in L Bolt Center-to-Center, 1.31 in Base to Bore Centerline, 2.88 in OAL x 2.56 in OAH
A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.
-
BrandDodge®
-
UPC782475513666
-
Manufacturer Part Number124460
-
CountryUSA
-
Load Capacity2899 lb Dynamic/1482 lb Static
-
Locking Device65 deg Set Screw
-
FinishPowder Coated
-
MaterialCast Iron
-
Maximum Speed7500 rpm
-
TypeNormal Duty
-
Mounting TypeTapped Base
-
Seal TypeSingle Lip
-
Series204
-
Base Width1-1/2 in
-
Base to Bore Centerline1.31 in
-
Bolt Center-to-Center Length2 in
-
Bore Diameter1/2 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height2.56 in
-
Overall Length2.88 in
-
Overall Width1.23 in
- 65 deg setscrew locking system
- Precision hardened and honed inner and outer rings
- Grade 10 balls
- Wide inner ring design
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100939366 |
| Motion Industries | 00560518 |
-
Alternative Part NumberTB-SC-008
-
UNSPSC31171504
-
Package DescriptionEACH
-
WarrantyLimited
-
Catalog
-
Owners/User Manual
-
Specification Sheet
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Dodge® 124460 204 Normal Duty Pillow Block Ball Bearing Unit, 1/2 in Dia Bore, 2 in L Bolt Center-to-Center, 1.31 in Base to Bore Centerline, 2.88 in OAL x 2.56 in OAH
A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.
ARC™ 11237 Coated Flap Wheel With Shank, 1-1/2 in Dia Wheel, 1 in W Face, 1/4 in Dia Shank, 120 Grit, Fine Grade, Aluminum Oxide Abrasive
Mounted and unmounted flap wheels are a great choice for light grinding, blending, deburring and finishing applications on a variety of metals. Flap wheels conform to many geometries and the radial flap design provides a continuous supply of fresh grain for consistent cutting action. Mounted flap wheels are most commonly used on die grinders.
Diversitech 189-227330 Variable Motor Start Capacitor, 189 to 227 uF, 330 V AC, Round
Diversitech 189-227330 Variable Motor Start Capacitor, 189 to 227 uF, 330 VAC, Round
Lenox® 22751OSB618R Reciprocating Saw Blade, 6 in L x 3/4 in W, 18 TPI, Steel Body, Universal/Toothed Edge Tang
Lenox® 22751OSB618R Reciprocating Saw Blade, 6 in L x 3/4 in W, 18 TPI, Steel Body, Universal/Toothed Edge Tang
FIBERGLAS HANDLED BOW RAKES-AME18796>
1/2" GALVANIZED STREET ELBOW-JPW1/2GSTE >
