Dodge® 117114 Stock Bore Taper Lock Bushing, 1-3/4 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475092444
-
Manufacturer Part Number117114
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating24000 in-lb
-
TypeStock Bore
-
Screw Size5/8 x 1-1/4 in
-
Number of Bolt Holes2
-
Hub Diameter5.63 in
-
Barrel Diameter4-1/4 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter4 in
-
Bore Diameter1-3/4 in
-
Overall Length2 in
- Size 3020 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number3020 X 1-3/4-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Specification Sheet
-
Catalog
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Dodge® 117114 Stock Bore Taper Lock Bushing, 1-3/4 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
18" SQUEEGEE COATER BRUSH FOR APPLYING BLACKTOP DRIVEWAY DRESSING, ROOF COATING AND ASPHALT SEALERS-JWH781247 >
Browning® 1045376 VP Series Type 2 Variable Pitch Sheave, 7/8 in Finished Bore, 4.15 in OD, 1 Groove, 2.7 to 3.5 in (3L)/3 to 4 in (A/4L)/3.2 to 4.2 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
#12 X 2-1/2" Pan Head Combo Sheet Metal Screws
BBI 486664 Lag Screw, 5/8 in, 4 in OAL, Low Carbon Steel, Zinc Blue
144" BI-METAL BANDSAW BLADE-MORZWEG083R10MAT>
