Dodge® 117113 Stock Bore Taper Lock Bushing, 1-11/16 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475092437
-
Manufacturer Part Number117113
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating24000 in-lb
-
TypeStock Bore
-
Screw Size5/8 x 1-1/4 in
-
Number of Bolt Holes2
-
Hub Diameter5.63 in
-
Barrel Diameter4-1/4 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter4 in
-
Bore Diameter1-11/16 in
-
Overall Length2 in
- Size 3020 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number3020 X 1-11/16-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Specification Sheet
-
Instruction/Installation Manual
-
Warranty Information
-
Catalog
Recently Viewed
Dodge® 117113 Stock Bore Taper Lock Bushing, 1-11/16 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
UP TO 4 TIMES STRONGER THAN A BRASS GROMMET, MADE FROM RECYCLED POLYMERS. COMPATIBLE WITH CANVAS OR POLY TARPS
-JWH742771 >
ASP-752-SS Industry Standard Clamping Collar, 2-Piece Construction, 3/4 in ID x 1-1/2 in OD x 1/2 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Weiler® 17263 Small Diameter Wheel Brush, 3 in Dia Brush, 3/8 in W Face, 0.016 in Dia Crimped Filament/Wire, 1/2 in Arbor Hole
Weiler® 17263 Small Diameter Wheel Brush, 3 in Dia Brush, 3/8 in W Face, 0.016 in Dia Crimped Filament/Wire, 1/2 in Arbor Hole
Stainless steel shim is made from a full hard, cold rolled, 302 stainless steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Widely used in applications where corrosion resistance is required. Used in conventional power plants, nuclear plants, oil and gas refineries and desalinization projects. Precision Brand® shim stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
BLACK HEATSHRINK TUBE KIT-MMMFP301KITBLK >
