Browning 1-11/16"-ID 3030-STYLE TL BUSHINGS BRW 3030 X 1-11/16
Browning® 3750494 Taper Bore Bushing, 1-11/16 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL
-
BrandBrowning®
-
UPC662289617814
-
Manufacturer Part Number3750494
-
CountryUSA
-
Taper1-1/2 in/ft
-
Torque Rating24000 in-lb
-
Screw Size5/8 in Dia x 1-1/4 in L
-
Number of Bolt Holes2
-
Barrel Diameter4-1/4 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter4 in
-
Bore Diameter1-11/16 in
-
Overall Length3 in
-
Suitable For Use WithGearbelt® Sprockets, HPT® and HPT Chain™ Synchronous Belt Drives
- Mounts flush in products - No protruding flanges to interfere with the drive
-
Alternative Part Number3030X 1 11/16
-
UNSPSC31163205
-
Package Description1/PK
-
Standards/ApprovalsABMA/AGMA/AIST/AWEA/CEMA/GEAPS/MPTA/NSSGA/PTDA Standards
-
Warranty1 Year
-
Instruction/Installation Manual
-
Warranty Information
-
Catalog
Recently Viewed
Browning® 3750494 Taper Bore Bushing, 1-11/16 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL
Dichtomatik S70011 O-Ring, 011 Dash Number, 0.301 in ID x 0.441 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Appleton® ETP™ WFC1050G WFC Weatherproof Lighting Fixture With Guard, (1) Lamp, 120 V AC, Powder Coated Housing
Appleton® ETP™ WFC1050G WFC Weatherproof Lighting Fixture With Guard, (1) Incandescent Lamp, 120 VAC, Powder Coated Housing
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
V-BELTOUTSIDE CIRCUMFERENCE 60."-JAS3V600 >
WATTS® 0002220 1L Series Self-Closing Temperature and Pressure Relief Valve, 1/2 in Nominal, MNPT x FNPT End Style, 125 psi Pressure, 210 deg F, Bronze Body
This 1/2 inch temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. It features a bronze body with NPT threaded male inlet and NPT threaded female outlet connections, 2 inch short thermostat with special thermo-bonded coating and test lever. It is CSA listed. Temperature relief at 210 degrees F (99 degree C), pressure relief range is 75 to 150 psi. The standard pressure settings is 125 psi.
