Dodge® 117084 Stock Bore Taper Lock Bushing, 1-1/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475509003
-
Manufacturer Part Number117084
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating4300 in-lb
-
TypeStock Bore
-
Screw Size3/8 x 5/8 in
-
Number of Bolt Holes2
-
Hub Diameter3-1/4 in
-
Barrel Diameter2-1/4 in
-
Keyway Size1/4 x 1/8 in
-
Bolt Circle Diameter2.13 in
-
Bore Diameter1-1/8 in
-
Overall Length1 in
- Size 1610 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number1610 X 1 1/8-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Warranty Information
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Dodge® 117084 Stock Bore Taper Lock Bushing, 1-1/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Browning® 3750395 Taper Lock Bushing, 1 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
Browning® 3750395 Taper Lock Bushing, 1 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
Contaminant-Free Premium Regular Coated Abrasive Flap Disc, 4-1/2 in Dia, 60 Grit, Medium Grade, Z3® Zirconia Alumina Abrasive, Type 29 Conical Disc
ASP-400-2-S Industry Standard Clamping Collar, 2-Piece Construction, 4 in ID x 5-1/4 in OD x 7/8 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Moline Bearing 19321211 Type E Pillow Block Bearing, 2-11/16 in Dia Bore, 8-13/16 in L Bolt Center-to-Center, 3-1/8 in Base to Bore Centerline, 12 in OAL x 6-5/16 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 11⁄16 in (2.6875 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
ASP-100-2-S Industry Standard Clamping Collar, 2-Piece Construction, 1 in ID x 1-3/4 in OD x 1/2 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
