Browning® 3749892 Taper Lock Bushing, 1-1/2 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
Browning® 3749892 Taper Lock Bushing, 1-1/2 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
-
BrandBrowning®
-
UPC662289616725
-
Manufacturer Part Number3749892
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating11300 in-lb
-
Screw Size1/2 x 1 in
-
Number of Bolt Holes2
-
Barrel Diameter3-3/8 in
-
Keyway Size5/16 x 5/32 in
-
Bolt Circle Diameter3-1/4 in
-
Bore Diameter1-1/2 in
-
Overall Length2-1/2 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
-
Alternative Part Number2525X 1 1/2
-
UNSPSC31163205
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Browning® 3749892 Taper Lock Bushing, 1-1/2 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
Browning® 3749892 Taper Lock Bushing, 1-1/2 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
CGW® 70125 Coated Abrasive Flap Disc, 4-1/2 in Dia, 320 Grit, Very Fine Grade, Silicon Carbide Abrasive, Type 29 Conical Disc
CGW® 70125 Coated Abrasive Flap Disc, 4-1/2 in Dia, 320 Grit, Very Fine Grade, Silicon Carbide Abrasive, Type 29 Conical Disc
The Mag-Torch® MT 579 is a high performance silver swirl MAP-Pro™ torch that delivers an extreme swirl flame, it has an on demand trigger giving you instant ignition and flame shut off. This torch has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting. This torch can solder upto 2 in of copper.
Browning® 1296391 Automatic Torque Limiter, 1 in Straight Bore, 3-1/2 in OD, 1800 in-lb (1 Spring)/3000 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
2" BUNA-N CAM & GROOVE GASKETS-DXN200GTHK >
Jacobs® 30343 Chuck Service Kit, For Use With 8-1/2N Model Chucks
