MCR Safety 9676S UltraTech® 9676 General Purpose Gloves, Wing Thumb Style, Polyurethane Palm, 15 ga Dyneema®, Gray/White, Knit Wrist Cuff, Resists: Abrasion, Cut, Puncture and Tear, HPPE Lining
MCR Safety CutPro® 13-Gauge Dyneema® Diamond Technology Shell Cut Resistant Work Gloves Polyurethane (PU) Coated Palm and Fingertips Micro-particle boosted high strength fiber provides cool-touch comfort and maximum durability One of the most distinguishing characteristics of Dyneema® fiber is its cool-to-touch property. This fiber's inherent ability to dissipate body heat and pass moisture from the inside of the glove to the outside results in longer wear time, promoting greater hand protection. The 9676 features a 13-gauge Certified Dyneema® Diamond Technology shell with a rugged PU coating on the palm and fingertips. The cut-resistant properties of this glove, combined with its outstanding abrasion and puncture resistance, make it an excellent choice for tough jobs. (Vending Packaged option available - VP9676). If you are looking for the best cut-resistant gloves, look no further than MCR Safety's Cut Pro® cut-resistant options.
-
BrandMCR Safety
-
UPC045143967612
-
Manufacturer Part Number9676S
-
CountryUSA
-
Material15 ga Dyneema®
-
CoatingPolyurethane
-
Coating CoverageFingers and Palm
-
ResistsAbrasion, Cut, Puncture and Tear
-
ColorGray/White
-
SeriesUltraTech® 9676
-
Cuff StyleKnit Wrist
-
SizeS
-
Length11.22 in
-
StyleWing Thumb
-
Palm MaterialPolyurethane
-
LiningHPPE
- 13 ga Salt and Pepper Dyneema Diamond Technology shell
- Cool and Comfortable
- Good dexterity
- Treated with ActiFresh
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 48GK72 |
| Berkshire eSupply | KB519676S |
| Fastenal | 1016098 |
| MSC | 08516973 |
-
UNSPSC46181536
-
Package Description1/DZ
-
Standards/ApprovalsEN 388 4343|PROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov/product
-
Specification Sheet
Recently Viewed
MCR Safety 9676S UltraTech® 9676 General Purpose Gloves, Wing Thumb Style, Polyurethane Palm, 15 ga Dyneema®, Gray/White, Knit Wrist Cuff, Resists: Abrasion, Cut, Puncture and Tear, HPPE Lining
MCR Safety CutPro® 13-Gauge Dyneema® Diamond Technology Shell Cut Resistant Work Gloves Polyurethane (PU) Coated Palm and Fingertips Micro-particle boosted high strength fiber provides cool-touch comfort and maximum durability One of the most distinguishing characteristics of Dyneema® fiber is its cool-to-touch property. This fiber's inherent ability to dissipate body heat and pass moisture from the inside of the glove to the outside results in longer wear time, promoting greater hand protection. The 9676 features a 13-gauge Certified Dyneema® Diamond Technology shell with a rugged PU coating on the palm and fingertips. The cut-resistant properties of this glove, combined with its outstanding abrasion and puncture resistance, make it an excellent choice for tough jobs. (Vending Packaged option available - VP9676). If you are looking for the best cut-resistant gloves, look no further than MCR Safety's Cut Pro® cut-resistant options.
Jacobs® 6287D 33BA 1/2 Fluted Medium Duty Drill Chuck, 0.08 to 0.5 in Capacity, 1/2-20 Mounting, Plain Bearing, K32 Key
Jacobs® 6287D 33BA 1/2 Fluted Medium Duty Drill Chuck, 0.08 to 0.5 in Capacity, 1/2-20 Mounting, Plain Bearing, K32 Key
BRUSH RESEARCH GBD-33/4180-SC Heavy Duty Flexible Cylinder Hone, 3-3/4 in Dia Bore, 5 in L Abrasive, 13-1/2 in OAL, 180 Grit
The BRM Flex- Hone® Tool is a resilient, flexible honing tool with a soft cutting action. It's unique construction allows the abrasive globules or "stones" to float, assuring the tool will be self-centering, self-aligning to the bore and self-compensating for wear. The tool is available in a variety of different grits and sizes ranging from 4 mm to 36 in. Whether your need is cross hole deburring, surface finishing or edge blending there is a Flex- Hone® Tool designed for you. A non-directional or crosshatched pattern is created on the surface that contains valuable valleys between the plateaus for oil retention. Finer grits can assist with achieving single RA finishes. In Automotive, Hydraulic, Pneumatic or Industrial applications, the Flex- Hone® Tool will provide a superior surface finish bringing increased product performance, longer product life and less product reject.
Milwaukee® 6890 Double Insulated Corded Electric Nibbler, 16 ga Cold Rolled Steel, 18 ga Stainless Steel Cutting, 1-3/4 in Cutting Radius, 1900 spm, 120 V AC/DC, Metal Housing, 11-1/4 in OAL
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A .87 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6890 nibbler can cut 16 gauge steel and 18 gauge stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.
MORSE® 22228 1655 Chucking Reamer, 0.499 in Dia x 8 in OAL, 0.4355 in Dia Straight Shank, Straight Flute
Hillman™ 40126 Wood Screw, #10, 1-1/4 in OAL, Flat Head, Phillips® Drive, Zinc Plated
Hillman™ 40126 Wood Screw, #10, 1-1/4 in OAL, Flat Head, Phillips® Drive, Zinc Plated
