MasterDrive R2-2.7/8 R2 Series Double Split Tapered Bushing, 2.87 in Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 4-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
-
BrandMasterDrive
-
UPC806372032904
-
Manufacturer Part NumberR2-2.7/8
-
CountryUSA
-
FinishBlack Phosphate
-
MaterialDuctile Iron
-
Flange Diameter5-3/8 in
-
Flange Thickness5/8 in
-
Torque Rating348 in-lb
-
TypeDouble Split
-
Screw Size3/8 x 1-3/4 in
-
SeriesR2 Series
-
Barrel Diameter4 in
-
Keyway Size3/4 x 3/8 in
-
Bolt Circle Diameter4-5/8 in
-
Bore Diameter2.87 in
-
Overall Length4-7/8 in
- Double split barrel provides better concentricity to the shaft
- 3/4 in per ft Taper on the barrel
- Highest degree of mechanical component locking
-
Alternative Part Number2105002870
-
Package DescriptionEACH
-
Catalog
-
Line Drawing
Recently Viewed
MasterDrive R2-2.7/8 R2 Series Double Split Tapered Bushing, 2.87 in Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 4-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
HCI Preferred Supplier 36220 4-Jaw Grease Gun Coupler, 1/8 in NPTF Thread, 1-1/2 in OAL, Steel
HCI Preferred Supplier 36220 4-Jaw Grease Gun Coupler, 1/8 in NPTF Thread, 1-1/2 in OAL, Steel
Porter-Cable® 97366 Random Orbital Sander Kit, 6 in, 2500 to 6000 opm
1/2" -MALE PIPE THREADX1-1/2" STAINLESS STEEL NIPPLE-FIT1/2X11/2SSN >
Coilhose® 624-S 600 Blow Gun, Extended Safety Tip, 150 psi Working, 24 in L Tube, 1/4 in FNPT Inlet x 1/8 in FNPT Outlet Thread, Die Cast Zinc, Domestic
The 600 series blow guns are a thumb lever style blow gun with an ergonomic shape and accept all Coilhose® 1/8 in tips. User comfort was designed into the 600 series with the elimination of the valve where the user's fingers are placed. Models that are designated as "safety" conform to OSHA standards for noise levels (1910.95) and 30 psi dead end pressure (1910.242B).
PINT STRYPEEZE PAINT REMOVER-JWH775389 >
