Browning® 1073071 Weld-On Hub, 1-3/4 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
Browning® 1073071 Weld-On Hub, 1-3/4 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
-
BrandBrowning®
-
UPC662289144884
-
Manufacturer Part Number1073071
-
CountryUSA
-
MaterialSintered Steel/Malleable Iron/Ductile Iron
-
Screw Size3/8-16
-
Number of Bolt Holes3
-
Bolt Circle Diameter3-3/8 in
-
Overall Length1-3/4 in
- Morse and Browning offer a complete line of Torque Overload Devices to protect machinery from overloads or jams
- Browning offers a complete set of replacement shear pins
- Shear pins are available in a wide range of minimum shear strength
-
Alternative Part NumberHCQ1 HUB
-
UNSPSC31171605
-
Package DescriptionEACH
-
WarrantyLimited
Recently Viewed
Browning® 1073071 Weld-On Hub, 1-3/4 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
Browning® 1073071 Weld-On Hub, 1-3/4 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
Browning® 1072966 Weld-On Hub, 2-5/16 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
Browning® 1072966 Weld-On Hub, 2-5/16 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
Browning® 1078229 Split Taper Bushing, 9/16 in Dia Bore, 1.57 in Small End/1.625 in Large End Dia Barrel, 2-1/2 in Dia Flange, 1-1/4 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Browning® 1072933 Weld-On Hub, 1-3/4 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
Browning® 1072933 Weld-On Hub, 1-3/4 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
Browning® 1072925 Weld-On Hub, 1-5/16 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
Browning® 1072925 Weld-On Hub, 1-5/16 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
MasterDrive H5/8 H Series Double Split Tapered Bushing, 5/8 in Dia Bore, 1-5/8 in Dia Barrel, 2-1/2 in Dia Flange, 1-11/32 in OAL, Powdered Metal
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
