Browning® 1069376 Split Taper Bushing, 7/8 in Dia Bore, 1.8555 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 1-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
-
BrandBrowning®
-
UPC662289109241
-
Manufacturer Part Number1069376
-
CountryUSA
-
MaterialSintered Steel
-
Flange Diameter3 in
-
Flange Thickness13/32 in
-
Screw Size5/16 x 1 in
-
Number of Bolt Holes3
-
Barrel Diameter1.8555 in Small End/1.9375 in Large End
-
Keyway Size3/16 x 3/32 in
-
Bolt Circle Diameter2-7/16 in
-
Bore Diameter7/8 in
-
Overall Length1-15/16 in
-
Suitable For Use WithBrowning® Multiple Groove Sheave
- Solid Flange and Double Split Barrel - Assures better concentricity to the shaft
- Key to Key Drive - With keys on both the shaft and product to provide the strongest possible drive
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100789818 |
| Applied Industrial Technologies | 100789818 |
-
Alternative Part NumberP1 7/8
-
UNSPSC31171605
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® 1069376 Split Taper Bushing, 7/8 in Dia Bore, 1.8555 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 1-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
MORSE® 61249 2089C High Performance Spiral Flute Tap, Right Hand Cutting, 3/8-24 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
MORSE® 61249 2089C High Performance Spiral Flute Tap, Right Hand Cutting, 3/8-24 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
Greenlee® 925-1-3/4 Ultra Hole Saw With Fixed Pockets, 1-3/4 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor
Greenlee® 925-1-3/4 Ultra Hole Saw With Fixed Pockets, 1-3/4 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor
Proto® JSCVM15T Reversible Spline Combination Wrench, 15 mm, 12 Points, 15 deg Offset, 7-7/8 in OAL, Forged Steel, Full Polished, ASME Specified
Proto® JSCVM15T Reversible Spline Combination Wrench, 15 mm, 12 Points, 15 deg Offset, 7-7/8 in OAL, Forged Steel, Full Polished, ASME Specified
Klein® D366-6C Fatigue Reducing Needle Nose Plier, Knurled Steel Jaw, 1-15/16 in L x 11/16 in W Jaw, 8 in OAL, 1/16 in W Tip
Klein® D366-6C Fatigue Reducing Needle Nose Plier, Knurled Steel Jaw, 1-15/16 in L x 11/16 in W Jaw, 8 in OAL, 1/16 in W Tip
United Abrasives-SAIT 23265 Thin High Speed Cut-Off Wheel, 7 in Dia x 1/16 in THK, 5/8 in Center Hole, A36T Grit, Aluminum Oxide Abrasive
United Abrasives-SAIT 23265 Thin High Speed Cut-Off Wheel, 7 in Dia x 1/16 in THK, 5/8 in Center Hole, A36T Grit, Aluminum Oxide Abrasive
