Browning® 1079102 Split Taper Bushing, 2-7/16 in Dia Bore, 2.7657 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 2-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
-
BrandBrowning®
-
UPC662289289837
-
Manufacturer Part Number1079102
-
CountryUSA
-
MaterialSintered Steel
-
Flange Diameter4-1/8 in
-
Flange Thickness17/32 in
-
Screw Size3/8 x 1-1/4 in
-
Number of Bolt Holes3
-
Barrel Diameter2.7657 in Small End/2.875 in Large End
-
Keyway Size5/8 x 5/16 in
-
Bolt Circle Diameter3-3/8 in
-
Bore Diameter2-7/16 in
-
Overall Length2-1/2 in
-
Suitable For Use WithBrowning® Multiple Groove Sheave
- Solid Flange and Double Split Barrel - Assures better concentricity to the shaft
- Key to Key Drive - With keys on both the shaft and product to provide the strongest possible drive
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
-
Alternative Part NumberQ1 2 7/16
-
UNSPSC31171605
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® 1079102 Split Taper Bushing, 2-7/16 in Dia Bore, 2.7657 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 2-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Irwin® Hanson® 53605 536 ST-5 Straight Screw Extractor, ST-5 Extractor, 3/8 in Drill, For Screw Size: 5/8 in, 3/8 in NPT, 3/8 in BSP
IRWIN Straight Flute Screw Extractors - 536/526 Series.
#2021 1-1/4" BRASS CUP HOOKS-NTL119693 >
Milwaukee® 48-20-4320 4-Cutter Rotary Hammer Drill Bit, 5/8 in Drill Bit, 3/4 in Spline Shank, 31 in D Cutting, Carbide Cutting Edge, 36 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
ShearTap™ 35248 2090M Oversized Spiral Point Tap, Right Hand Cutting, M10x1.25 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
ShearTap™ 35248 2090M Oversized Spiral Point Tap, Right Hand Cutting, M10x1.25 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
Browning® 1080076 Type S1 Split-Taper Bushing, 2-3/16 in Dia Bore, 4.418 in Dia Small End/4-5/8 in Dia Large End Dia Barrel, 6-3/8 in Dia Flange, 4-3/8 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
