Browning® 1079193 Split Taper Bushing, 1-1/8 in Dia Bore, 2.7032 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
-
BrandBrowning®
-
UPC662289209989
-
Manufacturer Part Number1079193
-
CountryUSA
-
MaterialSintered Steel
-
Flange Diameter4-1/8 in
-
Flange Thickness17/32 in
-
Screw Size3/8 x 1-1/4 in
-
Number of Bolt Holes3
-
Barrel Diameter2.7032 in Small End/2.875 in Large End
-
Keyway Size1/4 x 1/8 in
-
Bolt Circle Diameter3-3/8 in
-
Bore Diameter1-1/8 in
-
Overall Length3-1/2 in
-
Suitable For Use WithBrowning® Multiple Groove Sheave
- Keyed to both shaft and hub, external key provides positive drive with no torque on the cap screws
- Highest torque carrying capacity in the Browning® bushing product line
- Double split barrel assures true concentricity grips the shaft with positive clamp fit
- Fixed flange tightener, tightener shaft must be ordered separately
- No shaft required when used with Idler Bushing
- Ductile iron
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
-
Alternative Part NumberQ2 1 1/8
-
UNSPSC31171605
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® 1079193 Split Taper Bushing, 1-1/8 in Dia Bore, 2.7032 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Size & Type: 5.25-ounce aerosol spray can. Formula: Technical fine-grade molybdenum disulfide (moly) and graphite in a penetrating liquid carrier. Temperature Range: Effective from -20°F to 750°F (-7°C to 537°C). Common Uses: Aviation maintenance, industrial MRO, tractor-trailers, motorcycles, bicycles, and weapons.
765-L-7 JASON INDUSTRIAL PRODUCTS
7-RIB POLY-V V-BELT -JAS765L7 >
Dichtomatik N70116 O-Ring, 116 Dash Number, 0.737 in ID x 0.943 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
BBI 588637 Fully Threaded Machine Screw, 1/4-20, 1-1/4 in OAL, Round Head, Zinc CR+3 Plated, Phillips® Drive
BBI 588637 Fully Threaded Machine Screw, 1/4-20, 1-1/4 in OAL, Round Head, Zinc CR+3 Plated, Phillips® Drive
Proto® J390 Internal Retaining Ring-Clip Plier, 0.025 in Straight Jaw, 5-3/8 in OAL
