Browning 3-11/16"-ID QD F-STYLE BUSHINGS BRW F-3-11/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood's®
-
UPC698672702973
-
Manufacturer Part NumberF31116
-
CountryUSA
-
MaterialDuctile Iron
-
Flange Diameter6-5/8 in
-
Flange Thickness13/16 in
-
Torque Rating40000 in-lb
-
TypeStandard
-
Screw Size9/16-12 x 3-5/8 in
-
Number of Bolt Holes3
-
Barrel Diameter7/16 in
-
Keyway Size7/8 x 3/16 in
-
Bolt Circle Diameter5-5/8 in
-
Bore Diameter3-11/16 in
-
Overall Length3.63 in
- Size F bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
40-MM-ID SPHERICAL OD INSERT BEARING-NTNUEL208 >
NEEDLE BEARING INNER RACES-INAPI121612>
CARPET TRIM 1" X 6' SILVER-M-D78089 >
Morse® 131964 MHSTK Hole Saw, 6 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 5/8 to 18 Arbor
Remke Tuff-Seal™ 7303-008R Closed Mesh Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.22 to 0.32 in Cable, For Use With 1/2 in NPT Connector, Aluminum
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
