Browning 1-15/16"-ID J-STYLE BUSHINGS BRW J-1-15/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood's®
-
UPC698672703116
-
Manufacturer Part NumberJ11516
-
CountryUSA
-
MaterialCast Iron
-
Flange Diameter7-1/4 in
-
Flange Thickness1 in
-
Torque Rating55000 in-lb
-
TypeStandard
-
Screw Size5/8-11 x 4-1/2 in
-
Number of Bolt Holes3
-
Barrel Diameter5.1484 in
-
Keyway Size1/2 x 1/4 in
-
Bolt Circle Diameter6-1/4 in
-
Bore Diameter1-15/16 in
-
Overall Length4-1/2 in
- Size J bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
1/2" X 30" REDI-CUT BLACK PIPE-JWH404209 >
3/4" X 60" REDI-CUT BLACK PIPE-JWH404268 >
S400 JOBSITE CANVAS SHEATH FOR THE SEYMOUR MODEL NO. MA22 22" MACHETE.
-JWH750468 >
Morse® 194615 A Plate Ground Sprocket, 28 Teeth, For Use With Model 350 Torque Limiter Model, 120.4 mm OD
Morse® 194615 A Plate Ground Sprocket, 28 Teeth, For Use With Model 350 Torque Limiter Model, 120.4 mm OD
Browning® 1305002 Stock Shear Pin, 3/16 in Dia Neck, 1-1/8 in OD, For Use With Model SHH1 Hub, 3730 in-lb Torque, Steel
Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered.
