Browning 1-1/8"-ID QD SH-STYLE BUSHINGS BRW SH-1-1/8
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood's®
-
UPC698672700276
-
Manufacturer Part NumberSH118
-
CountryUSA
-
MaterialSteel
-
Flange Diameter2-11/16 in
-
Flange Thickness3/8 in
-
Torque Rating3500 in-lb
-
TypeStandard
-
Screw Size1/4-20 x 1-3/8 in
-
Number of Bolt Holes3
-
Barrel Diameter1.871 in
-
Keyway Size1/4 x 1/8 in
-
Bolt Circle Diameter2-1/4 in
-
Bore Diameter1-1/8 in
-
Overall Length1-1/4 in
- Size SH bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
4 -FEMALE PIPE THREAD 45-DEGREE BLACK ELBOW
AIR FILTERS
Milwaukee® SAWZALL® The Torch™ 48-00-8784 Demolition Straight Back Reciprocating Saw Blade, 6 in L x 1 in W, 18 TPI, Bi-Metal Body, Universal/Toothed Edge Tang
THE TORCH™ metal-cutting blades with the Double Duty Upgrade™ feature a tooth form optimized for the longest life and maximum durability. Tough Neck™ is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron™ features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.
JACKSON SAFETY® 14809 C10 Lightweight Bump Cap, Universal, Yellow, HDPE, 4-Point Pinlock Suspension, ANSI Specified
Jackson Safety* C10 bump caps can help provide on the job protection your workers. They help offer protection from minor bumps and scalp lacerations (where ANSI standards are not required). These lightweight safety hats are made of molded HDPE (high density polyethylene) and feature a 4-point suspension system with an absorbent brow pad. The pinlock sizing system can accommodate head sizes 6.5 to 8.25 and the helmets can be made compatible with a face shield for additional coverage.
