CONS SPB-24-ADJ Linear Recirculating Ball Bearing, 1.5 in Dia Shaft, 3.25 in Dia Outside
CONS SPB-24-ADJ Linear Recirculating Ball Bearing, 1.5 in Dia Shaft, 3.25 in Dia Outside
-
BrandCONS
-
UPC644075096959
-
Manufacturer Part NumberSPB-24-ADJ
-
CountryUSA
-
TypeLinear Recirculating
-
Width4.125 in
-
Shaft Diameter1.5 in
-
Outside Diameter3.25 in
- Reduced friction and noise, high performance
- Load ratings may vary between manufacturers
-
Package DescriptionEACH
Recently Viewed
CONS SPB-24-ADJ Linear Recirculating Ball Bearing, 1.5 in Dia Shaft, 3.25 in Dia Outside
CONS SPB-24-ADJ Linear Recirculating Ball Bearing, 1.5 in Dia Shaft, 3.25 in Dia Outside
Browning® 1224542 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 46 Teeth, 4.6 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Dodge® 125857 209 Normal Duty Pillow Block Ball Bearing Unit, 45 mm Dia Bore, 139.7 to 157.2 mm L Bolt Center-to-Center, 54 mm Base to Bore Centerline, 189 mm OAL x 108.7 mm OAH
Dodge® 125857 209 Normal Duty Pillow Block Ball Bearing Unit, 45 mm Dia Bore, 139.7 to 157.2 mm L Bolt Center-to-Center, 54 mm Base to Bore Centerline, 189 mm OAL x 108.7 mm OAH
Crosby® 1032652 HG-228 Turnbuckle, Jaw/Jaw, 5/8 in Thread, 3500 lb Working, 12 in Take Up, 22.16 in L Close, Steel
Crosby® 1032652 HG-228 Turnbuckle, Jaw/Jaw, 5/8 in Thread, 3500 lb Working, 12 in Take Up, 22.16 in L Close, Steel
6" -18LB NATURAL TIES 100 PER BAG-CTE618N100 >
Browning® 1224583 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 50 Teeth, 5 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
