Browning® 1076686 QD Bushing, 1-1/4 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandBrowning®
-
UPC662289404650
-
Manufacturer Part Number1076686
-
CountryUSA
-
MaterialDuctile Iron
-
Flange Diameter3-1/8 in
-
Flange Thickness7/16 in
-
Torque Rating5000 in-lb
-
TypeStandard
-
Screw Size1/4-20 x 1-7/8 in
-
Number of Bolt Holes3
-
Barrel Diameter2-3/16 in
-
Keyway Size1/4 x 1/8 in
-
Bolt Circle Diameter2-11/16 in
-
Bore Diameter1-1/4 in
-
Overall Length1.83 in
-
Suitable For Use WithBrowning® Sheaves, Sprockets and Pulleys
- Reverse mounting ability - This bushing system allows for mounting on either side of the product to allow for a more flush view of the product face
- Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- Reverse mounting ability - This bushing system allows for mounting on either side of the product to allow for a more flush view of the product face
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171516
-
Alternative Part NumberSD 1 1/4
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
-
Instruction/Installation Manual
Recently Viewed
Browning® 1076686 QD Bushing, 1-1/4 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
5/8" DIAMETERX4" SHOULDER BOLT-HOL08120 >
The Power-Stud® anchor, is a fully threaded, torque-controlled, wedge expansion anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
The drum adapter in conjunction with motor head 8945 can be used on a standard 55 Gallon barrel to create a huge vacuum cleaner for the biggest jobsites. Place motor head on top of drum adapter and the gasket creates suction to hold the motor securely while the vacuum is in operation. Uses 16 in. accessories.
Dodge® 070377 Type S2000 Pillow Block Roller Bearing Unit, 4-15/16 in Dia Bore, 15 to 16 in L Bolt Center-to-Center, 5-1/2 in Base to Bore Centerline, 18.63 in OAL x 11.13 in OAH
Dodge® 070377 Type S2000 Pillow Block Roller Bearing Unit, 4-15/16 in Dia Bore, 15 to 16 in L Bolt Center-to-Center, 5-1/2 in Base to Bore Centerline, 18.63 in OAL x 11.13 in OAH
HCI Preferred Supplier 944428 Lift In-Line Check Valve, 1/4 in Nominal, NPT End Style, Forged Brass Body
HCI Preferred Supplier 944428 Lift In-Line Check Valve, 1/4 in Nominal, NPT End Style, Forged Brass Body
