Browning 1-GRV A OR B-BELT H-BUSH SHEAVES BRW BK-30-H
Browning® Classical Gripbelt® 1042381 BK Series Type 1 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 3.15 in OD, 2.6 in (A)/3.1 in (B) Dia Pitch, 7/8 in W Face
-
BrandBrowning®
-
UPC662289272228
-
Manufacturer Part Number1042381
-
CountryUSA
-
Face Width7/8 in
-
Bushing TypeH
-
Pitch Diameter2.6 in (A)/3.1 in (B)
-
FinishGray Painted
-
MaterialCast Iron
-
TypeType 1
-
SeriesBK Series
-
Hub Projection29/32 in
-
Outside Diameter3.15 in
-
Bore Diameter3/8 to 1-1/2 in
-
Bore TypeSplit Taper
-
Overall Length1-15/16 in
-
Suitable For Use With4L/A and 5L/B Cross Section Belt
- Largest Selection of H Bushed sheaves of any other manufacturer - Browning offers bushed sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Combination Groove - All Browning BK H Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Tightened micro-finish on groove walls for increased belt life
- Split Taper® bushings are highest torque carrying capacity in the Browning® bushing product line
- Double split barrel assures true concentricity
- Largest Selection of H Bushed sheaves of any other manufacturer - Browning offers bushed sheaves in both A and B Combination (A/B) configuration
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Combination Groove - All Browning BK H Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- One and two Groove product are available in 1.6 in to 8.5 in covering up to 25 horsepower
- VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore
- The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with
- When discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100783576 |
| Motion Industries | 00728250 |
-
Alternative Part NumberBK30H
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1042381 BK Series Type 1 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 3.15 in OD, 2.6 in (A)/3.1 in (B) Dia Pitch, 7/8 in W Face
3/4" X 3/4" X 1/2" SCH-80 BLACK TEES-JPW3/4X3/4X1/2XHBT>
W-1-7/8 1-7/8"-ID Thrust
1-7/8"-ID THRUST BALL BEARING-INAW17/8>
Sealmaster® 705616 FB-T Non-Expansion Standard Duty Round/Straight Bore Ball Bearing Unit With Flinger, 1-3/16 in Dia Bore, 2-1/16 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 3-7/32 in OAL/Dia
Sealmaster® gold mounted ball bearings feature wide outer race insert bearing with a land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system. This provides a direct path for lubrication into the bearing. It also helps prevent outer ring rotation. Available with either setscrew or Skwezloc®concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex®HP grease loss and friction.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
3.4" CPVC ADAPTER USED WITH COMPRESSION FITTING TO ADAPT CPVC PIPE TO IPS OR COPPER TUBE.-JWH412226 >
