Browning 1-GRV 7/8"-ID A-BELT SHEAVES BRW AK-64 X 7/8
Browning® Classical Gripbelt® 1027002 AK Series Type 3 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 6-1/4 in OD, 6.2 in (A)/5.66 in (3L) Dia Pitch, 3/4 in W Face
-
BrandBrowning®
-
UPC662289266821
-
Manufacturer Part Number1027002
-
CountryUSA
-
Face Width3/4 in
-
Pitch Diameter6.2 in (A)/5.66 in (3L)
-
MaterialCast Iron
-
TypeType 3
-
SeriesAK Series
-
Hub Projection15/32 in
-
Outside Diameter6-1/4 in
-
Bore Diameter7/8 in
-
Bore TypeFinished
-
Overall Length1-7/32 in
-
Suitable For Use With4L/A and 3L Cross Section Belt
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Twice balanced after assembly
- Tightened micro-finish on groove walls for increased belt life
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
-
Alternative Part NumberAK64X7/8
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1027002 AK Series Type 3 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 6-1/4 in OD, 6.2 in (A)/5.66 in (3L) Dia Pitch, 3/4 in W Face
3/8" -HOSEX6-FLAT FACE FEMALE-MHDE0606FF >
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
Milwaukee® 48-39-0572 Sub-Compact Portable Band Saw Blade, 27 in L, 1/2 in W x 0.02 in THK, 18 TPI, Bi-Metal Body
Maximize your subcompact band saw performance and make straight, accurate cuts in a variety of materials with the Milwaukee® 18 TPI subcompact portable band saw blade (3-Pack). Get long tooth life and exceptional durability when cutting a variety of metal, including strut, conduit, angle iron, copper tube, threaded rod and pipe. The blade's tooth form, pitch and set ensure straight, accurate cuts time and time again.
TA3203H25M Dodge® Torque-Arm™ II 906002 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 50 hp, 15:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
TXT926AT Dodge® Torque-Arm™ II 904002 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 20 hp, 15:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
