Browning 1-GROOVE 7/8"-ID A-BELT SHEAVES BRW AK-32 X 7/8
Browning® Classical Gripbelt® 1026269 AK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 3-1/4 in OD, 3.2 in (A)/2.66 in (3L) Dia Pitch, 21/32 in W Face
-
BrandBrowning®
-
UPC662289216222
-
Manufacturer Part Number1026269
-
CountryUSA
-
Face Width21/32 in
-
Pitch Diameter3.2 in (A)/2.66 in (3L)
-
MaterialCast Iron
-
TypeType 2
-
SeriesAK Series
-
Hub Projection7/16 in
-
Outside Diameter3-1/4 in
-
Bore Diameter7/8 in
-
Bore TypeFinished
-
Overall Length1-3/32 in
-
Suitable For Use With4L/A and 3L Cross Section Belt
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Twice balanced after assembly
- Tightened micro-finish on groove walls for increased belt life
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Wrapped construction - Browning offers a full line of wrapped FHP Belts which provides smooth quiet operation
- Wrapped FHP Belts are more tolerant to slipping and misalignment than Raw Edge Belts
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
-
Alternative Part NumberAK32X7/8
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1026269 AK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 3-1/4 in OD, 3.2 in (A)/2.66 in (3L) Dia Pitch, 21/32 in W Face
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
WypAll* 41055 X80 Cleaning Wiper, 13.4 x 12.5 in, 475 Sheets Capacity, Hydroknit*, Red
Whether you're cleaning up grease or soaking up spills, it pays to use the best supplies. Trust the WypAll® Brand, the one that sets the standard for excellence in cloths. WypAll® X80 Extended Use Cloths feature innovations like high tech HydroKnit fast absorbing material and are durable for scrubbing. These contaminant free commercial cloths are a favorite replacement for industrial cloth towels, which can harbor dangerous chemicals, such as lead (In a 2003 Gradient study, 100% of the sampled laundered shop towels tested, lead was detected at levels that may exceed health based exposure guidelines.). WypAll® X80 are made of soft pulp fibers, bonded to a polypropylene base sheet for absorbency and durability, making them suitable for removing dirt, oil, grime and solvents in industrial and manufacturing businesses. The reusable cloths are reinforced for strength when wet and dry. These bulk cloths are a great alternative safer and more efficient to replace laundered rental shop towels or and cleaning towels. Use them for heavy duty machine and part wiping, wiping metal shavings, prepping surfaces with solvents and cleaning rough surfaces. After all, every business gets dirty. But for the toughest grease and grime, you can trust WypAll® X80 Cloths.
HCI Preferred Supplier FSO240446 Hydraulic Adapter, 9/16-18 x 3/8-18 Nominal, Male O-Ring Face Seal x MNPT, Steel
HCI Preferred Supplier FSO240446 Hydraulic Adapter, 9/16-18 x 3/8-18 Nominal, Male O-Ring Face Seal x MNPT, Steel
Kuri Tec® K050-1014X100 K050 Phthalate Free Tubing, 100 ft L, 40 psi Working, PVC, Domestic
Kuri Tec® K050-1014X100 K050 Phthalate Free Tubing, 100 ft L, 40 psi Working, PVC, Import
Crown® by Aervoe® 3095 Mold Cleaner, 16 oz Aerosol Can, Clear, 40 to 110 deg F
This mold cleaner removes all release agent residues, deposits or grease, oil and other soils that contaminate molded parts and cause metal corrosion.
