Gates® Power Transmission Super HC® 5V1060 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 106 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053290752
-
Manufacturer Part Number5V1060
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness35/64 in
-
MaterialChloroprene
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section Size5V
-
Series9334
-
Number of Ribs1
-
Outside Length106 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number93341060
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Super HC® 5V1060 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 106 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Gates® Power Transmission PowerGrip® 480H100 Heavy Timing Belt, 1 in W, 48 in OAL, 1/2 in Pitch, 96 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
3/8" HOSEX6-FBSPP 90 HYDRAULIC HOSE END-MHDE0606FBSPP90 >
Speakman® SE-495 Traditional Eye/Face Wash, Wall Mount, ANSI/ISEA Z358.1
Speakman® traditional series round bowl eye/face wash stations provide the highest level of performance. All traditional series eye/face wash stations feature dual spray heads with automatic flow controls and flip top dust covers. The aerated water flow, a Speakman® signature feature allows soft flowing water to provide a wider coverage, cleaning full facial areas. Additionally traditional eye/face wash stations are equipped with a stay open ball valve activated by a paddle handle allowing hands free operation once the eye/face wash has been activated. The Speakman® Traditional Series SE-495 Eye and Face Wash Plastic Bowl Wall Mount System is a wall mounted unit with a yellow plastic bowl meets the ANSI/ISEA Z385.1 standard and OSHA compliance.
Browning® Classical Gripbelt® 1028893 BK Series Type 3 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 6-3/4 in OD, 6.2 in (A)/6.7 in (B) Dia Pitch, 7/8 in W Face
HCI Preferred Supplier 28025 Union Tee, 1/4 in Nominal, FNPT End Style, Brass
HCI Preferred Supplier 28025 Union Tee, 1/4 in Nominal, FNPT End Style, Brass
