Browning® Classical Gripbelt® 1027945 BK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027945 BK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
-
BrandBrowning®
-
UPC662289315260
-
Manufacturer Part Number1027945
-
CountryUSA
-
Face Width13/16 in
-
Pitch Diameter2.2 in (A)/2.7 in (B)
-
MaterialCast Iron
-
TypeType 2
-
SeriesBK Series
-
Hub Projection13/32 in
-
Outside Diameter2.7 in
-
Bore Diameter7/8 in
-
Bore TypeFinished
-
Overall Length1-7/32 in
-
Suitable For Use With4L/A and 5L/B Cross Section Belt
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Tighter tolerances by 25%
- Twice balanced after assembly
- Tightened micro-finish on groove walls for increased belt life
- Precision balanced to provide smooth, vibration free performance
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
-
Alternative Part NumberBK27X7/8
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1027945 BK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027945 BK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
Gates 5-V-2500 Industrial V-Belts - 5V Section, 5/8 in Top Width, 1 Strand, 250.0000 in Nominal Outside Length, Smooth
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Browning® PD9010 Taper Bore Bushing Kit, 1-7/8 in ID x 2-3/16 in OD Dia Bushing, For Use With TorqTaper® Plus Size 203SMTP Shaft Mount Speed Reducer, Ductile Iron
Many accessories accompany the Browning® shaft mount reducer. These accessories are designed to provide installation flexibility, improved performance and safety.
F4B-SCM-215 Dodge® 126196 216 Medium Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 2-15/16 in Dia Bore, 6 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 7-3/4 in OAL/Dia
F4B-SCM-215 Dodge® 126196 216 Medium Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 2-15/16 in Dia Bore, 6 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 7-3/4 in OAL/Dia
Milwaukee® 48-73-7941 Insulating Cut-Resistant Gloves, M, Knit Wrist Cuff, Resists: Abrasion, Cut, Puncture and Tear, ANSI Cut-Resistance Level: A4, ANSI Puncture-Resistance Level: A3
The MILWAUKEE® ANSI/ISEA 105-2016 Cut Level 4 Winter Dipped Gloves are designed to provide ultimate warmth, all–day comfort, and best-in-class dexterity for handling small objects. The insulated winter work gloves utilize a warm acrylic terry liner to maintain warmth in the coldest outdoor conditions. The gloves have a secure dual thermal liner to comfortably keep users' hands warm without the liner separating after extended use on the job site. The gloves feature a 15 gauge nylon outer liner resulting in high dexterity fingertips and breathability. These insulated cut-resistant work gloves are ideal for material handling, demolition, wire stripping, pipe threading, general-purpose, and remodeling applications. These warm winter work gloves are constructed of ¾ double-dipped latex palm microfinish for water resistance to provide best-in-class grip performance in the coldest temperatures.
Dodge® 128763 206 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-1/4 in Dia Bore, 4.59 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 5.56 in OAL/Dia
Dodge® 128763 206 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-1/4 in Dia Bore, 4.59 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 5.56 in OAL/Dia
