Browning 6-GRV 5-V-BELT S-BUSH SHEAVES BRW 6-S-5-V-132
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
-
BrandBrowning®
-
UPC662289211173
-
Manufacturer Part Number1062298
-
CountryUSA
-
Face Width4-7/16 in
-
Bushing TypeS1
-
Pitch Diameter13.1 in
-
MaterialCast Iron
-
TypeType 13 Arm
-
Number of Grooves6
-
Outside Diameter13.2 in
-
Bore Diameter1.69 to 4.25 in
-
Bore TypeSplit Taper
-
Overall Length5-5/16 in
-
Suitable For Use WithGripBelt® 5V Cross Section V-Belt
- Incorporates Browning Split Taper Bushing - The only bushing system that provides a true Key-to-Key drive to both the shaft and the hub
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
-
Alternative Part Number6S5V132
-
UNSPSC26111806
-
Package DescriptionEACH
-
Standards/ApprovalsABMA/AGMA/AIST/AWEA/CEMA/GEAPS/MPTA/NSSGA/PTDA Standards
-
Warranty1 Year
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
2.000" X 2.500" X .250" SINGLE LIP GREASE SOLID SEAL-CHI19748 >
TAPERED ROLLER BEARING CONE-NTN39585 >
Dodge® 123868 207 Normal Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.81 in Base to Bore Centerline, 6-1/2 in OAL x 3.69 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
THE 5-PACK OF 4" UNIVERSAL WALLPAPER STRIPPER BLADES ARE MADE OF 1095C, HARDENED, TEMPERED, AND GROUND STEEL. THESE BLADES ARE FOR STRIPPING WALLPAPER, PAINT AND RESIDUE FROM WALLS, FLOORS AND OTHER HARD SURFACES. THEY ARE ALSO SCORED TO BREAK OFF ONE END, LEAVING A 3.25" BLADE FOR USE WITH OTHER TOOLS.
-JWH775913 >
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP3150-14MGT-55 9232 Synchronous Belt, 225 Teeth, 14 mm Pitch, 3150 mm OAL, 55 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
