Smith Bearing® CR-1-5/8-X Cylindrical Stud Type Needle Bearing Cam Follower, 1-5/8 in Dia x 7/8 in W Roller, 5/8 in Dia x 1-1/2 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
-
BrandSmith Bearing®
-
UPC651041035386
-
Manufacturer Part NumberCR-1-5/8-X
-
CountryUSA
-
Load Capacity5560 lb Dynamic/5730 lb Static
-
Thread Length3/4 in
-
Thread Size5/8-18 UNF-2A
-
Closure TypeSealed
-
TypeCylindrical Stud Type
-
Roller Diameter1-5/8 in
-
Roller Material52100 Steel
-
Roller Width7/8 in
-
Head TypeScrewdriver Slot
-
SeriesCR-X
-
Stud Diameter5/8 in
-
Stud Length1-1/2 in
-
Stud MaterialCarbon Steel
-
Stud TypeStandard
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 13W692 |
-
UNSPSC31171530
-
Warranty12 months
-
Full Engineering Drawing
-
Catalog
Recently Viewed
Smith Bearing® CR-1-5/8-X Cylindrical Stud Type Needle Bearing Cam Follower, 1-5/8 in Dia x 7/8 in W Roller, 5/8 in Dia x 1-1/2 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
1" -ID LOW PILLOW BLOCK UNIT-FYHSL20516 >
3/8" 45-DEGREE GALVANIZED STREET ELBOW-JPW3/8G45STE >
Gates® Power Transmission Hi-Power® II C134 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 138 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
NIBCO® 210-020 Pipe Nipple, 1 in x 2 in L MNPT, PVC, SCH 80/XH, Molded, Domestic
Connection Type: Male Threaded x Male Threaded (TBE - Threaded Both Ends).Material Class: Schedule 80 PVC, built for higher-pressure commercial and irrigation systems. Dimensions: 1-inch nominal diameter by 2 inches in length.
2 -MALE PIPE THREADX12 GALVANIZED NIPPLE
