Browning 2-GRV 7/8"-ID A-BELT SHEAVES BRW 2-AK-25 X 7/8
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
-
BrandBrowning®
-
UPC662289315673
-
Manufacturer Part Number1031822
-
CountryUSA
-
Face Width1-3/8 in
-
Pitch Diameter2-1/2 in (A)/1.96 in (3L)
-
MaterialCast Iron
-
TypeType 1
-
SeriesAK Series
-
Hub Projection15/32 in
-
Number of Grooves2
-
Outside Diameter2.55 in
-
Bore Diameter7/8 in
-
Bore TypeFinished
-
Overall Length1-27/32 in
-
Suitable For Use WithA and 3L Cross Section Belts
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
-
Alternative Part Number2AK25X7/8
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
5/8" X 3/4" HOSE BARBX FEMALE GARDEN HOSE ADAPTER-FTG30041 >
Browning® PB9007 Taper Bore Bushing Kit, 1-3/16 in ID x 1-7/16 in OD Dia Bushing, For Use With TorqTaper® Plus Size 107SMTP Shaft Mount Speed Reducer, Ductile Iron
Many accessories accompany the Browning® shaft mount reducer. These accessories are designed to provide installation flexibility, improved performance and safety.
5/16" X 5/16" BRASS FLARE UNIONS-FTG242X5>
HCI Preferred Supplier 18101B Tube Tee, 1/8 in, Compression, CA360 Brass
Justrite® 09300 Foot Operated Oily Waste Can, 10 gal Capacity, 13-15/16 in Dia 18-1/4 in H, Galvanized Steel, Red
Dispose of oil-soaked rags and prevent fires caused by stray sparks or spontaneous combustion. Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a powder-coat finish provides chemical resistance. Lid opens no more than a 60º angle as required by UL. Approved by FM, UL, and TÜV. All cans carry a ten-year warranty. For the safe collection and storage of oil-soaked materials, reducing fire risks and promoting workplace safety and environmental responsibility in industries, such as automotive, manufacturing and construction.
