Gates® Power Transmission PowerGrip® 900H200 Heavy Timing Belt, 2 in W, 90 in OAL, 1/2 in Pitch, 180 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053566932
-
Manufacturer Part Number900H200
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width2 in
-
Series9257
-
Number of Teeth180
-
Overall Length90 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573419
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® 900H200 Heavy Timing Belt, 2 in W, 90 in OAL, 1/2 in Pitch, 180 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gates® Power Transmission PowerGrip® 630XH200 Extra Heavy Timing Belt, 2 in W, 63 in OAL, 7/8 in Pitch, 72 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
1-7/16" -ID LOW PILLOW BLOCK UNIT-FYHEASL20723 >
SHAFT MOUNT REDUCER TORQTAPER PLUS BUSHING KIT, 1-1-1/16" BORE-BRW215TBP111 >
Browning® 1031814 AK Series Type 1 FHP Sheave, 3/4 in Finished Bore, 2.55 in OD, 2 Grooves, 2-1/2 in (A)/1.96 in (3L) Dia Pitch, 1-3/8 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
1/2" -ID LOW PILLOW BLOCK UNIT-FYHEASL2018 >
