FC-IP-307RE Dodge® 069860 307 Series Expansion Imperial Flange Mount Roller Bearing Unit, 3-7/16 in Dia Bore, 6.09 in L Bolt Center-to-Center, 8.63 in Dia Bolt Circle, Piloted Flange Mount, 10-1/4 in OAL/Dia
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
-
BrandDodge®
-
UPC782475310555
-
Manufacturer Part Number069860
-
CountryUSA
-
Load Capacity65500 lb Dynamic/81500 lb Static
-
Locking DeviceAdapter Mounted
-
Temperature Rating-100 to 200 deg F
-
FinishUncoated
-
Flange Mounting TypePiloted
-
Maximum Speed1825 rpm
-
TypeExpansion Imperial
-
Seal MaterialRubber
-
Series307
-
Bearing MaterialSteel
-
Bolt Center-to-Center Length6.09 in
-
Bolt Circle Diameter8.63 in
-
Bore Diameter3-7/16 in
-
Overall Depth4.17 in
-
Overall Length/Diameter10-1/4 in
- Ease in mounting and dismounting achieved through patented adapter system
- Adapter sleeve improves concentricity and reduces inherent vibration
- Seal/land maintains full seal contact when misaligned
- Corrosion resistant flinger blocks contaminants
- Steel cage with guide rings offers precision roller guidance
- Patented triple lip nitrile seal resists heat and chemical breakdown
-
Alternative Part NumberFC-IP-307RE
-
UNSPSC31171510
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
Instruction/Installation Manual
-
Specification Sheet
-
Line Drawing
-
Catalog
Recently Viewed
FC-IP-307RE Dodge® 069860 307 Series Expansion Imperial Flange Mount Roller Bearing Unit, 3-7/16 in Dia Bore, 6.09 in L Bolt Center-to-Center, 8.63 in Dia Bolt Circle, Piloted Flange Mount, 10-1/4 in OAL/Dia
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
Sealmaster® 550257 RFB Non-Expansion Round/Straight Bore Tapered Roller Bearing unit, 2-11/16 in Dia Bore, 6 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 7-3/4 in OAL/Dia
Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive Type E bearings. The exclusive features include unitized replaceable inserts, self aligning capability, split housing and the Sealmaster® alignment pin which provides for a direct path for lubrication into the bearing and helps prevent outer ring rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric with a wide variety of housing, sealing and lubrication options.
LADIES LEATHER PALM 2-1/2" CUFF GLOVES - GLV500SCL >
Sealmaster® 550253 RFB Non-Expansion Round/Straight Bore Tapered Roller Bearing unit, 2-3/16 in Dia Bore, 4-7/8 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 6-1/4 in OAL/Dia
Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive Type E bearings. The exclusive features include unitized replaceable inserts, self aligning capability, split housing and the Sealmaster® alignment pin which provides for a direct path for lubrication into the bearing and helps prevent outer ring rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric with a wide variety of housing, sealing and lubrication options.
LARGE FOAM NITRILE GLOVE-BST380L08>
MCR Safety 3250M 3250 Insulating General Purpose Gloves, Driver, Gunn Cut/Straight Thumb Style, M, Cowhide Leather Palm, 7 ga Cotton Thread/Leather/Polyester, Beige, Slip-On Cuff, Uncoated Coating, Resists: Abrasion, Fleece Lining
From wranglin' to buildin', these gloves are tough for the job! cowhide is the most commonly used leather due to availability. Characteristics include a good balance between abrasion-resistance, dexterity, durability and comfort.
