Gates® Power Transmission Poly Chain® GT®2 8MX-67S-21 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 6.654 in OD, 67 Grooves, 6.717 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053271089
-
Manufacturer Part Number8MX-67S-21
-
CountryUSA|Canada
-
Face Width1.2 in
-
Bushing Type2517
-
Pitch8 mm
-
Pitch Diameter6.717 in
-
MaterialDuctile Iron
-
Flange Diameter6.88 in
-
Series7718
-
Hub Diameter4-1/2 in
-
Number of Grooves67
-
Outside Diameter6.654 in
-
Bore Diameter1/2 to 2-11/16 in
-
Bore TypeTaper-Lock®
-
Overall Length1-3/4 in
-
Suitable For Use With21 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77182067
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-67S-21 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 6.654 in OD, 67 Grooves, 6.717 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Milwaukee® 2962-20 M18™ FUEL™ Cordless Variable Mid-Torque Impact Wrench With Friction Ring, 1/2 in, 650 in-lb Torque, 18 V, 6 in OAL
The MILWAUKEE® M18 FUEL™ " Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 600 ft-lbs of nut-busting torque and only weighs 5.0 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This battery-powered impact wrench is the most compact in its class, allowing access to stubborn fasteners in spaces where larger impact wrenches can’t fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack.
Browning® 3748936 Taper Lock Bushing, 1-1/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
Browning® 3748936 Taper Lock Bushing, 1-1/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
L-PITCHX30" DOUBLE TIMING BELT-JASD300L050 >
MINIATURE FLANGED BASE BULBS-BULPR3 >
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL53112ZNR >
