Gates® Power Transmission PowerGrip® GT®2 P56-8MGT-50 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5.56 in OD, 56 Grooves, 5.614 in Dia Pitch, 2.36 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
-
BrandGates® Power Transmission
-
UPC72053459128
-
Manufacturer Part NumberP56-8MGT-50
-
CountryUSA|Canada
-
Face Width2.36 in
-
Bushing Type2517
-
Pitch8 mm
-
Pitch Diameter5.614 in
-
MaterialCast Iron
-
Flange Diameter5.95 in
-
Series7708
-
Hub Diameter4.6 in
-
Number of Grooves56
-
Outside Diameter5.56 in
-
Bore Diameter1/2 to 2-11/16 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With50 mm W PowerGrip® GT®3 and PowerGrip® GT®2 Belts
- Full split in bushing allows easy installation and removal
- Precise sprocket design produces positive, press fit to shaft
- Precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77085056
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® GT®2 P56-8MGT-50 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5.56 in OD, 56 Grooves, 5.614 in Dia Pitch, 2.36 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
60-MM-ID HIGH PILLOW BLOCK UNIT - FYHUCP21260MM>
1/2"-MPT X 1/8"-FPT POLY BUSHINGS-VLY3RB1218>
5/16" -IDX7/16" CLEAR VINYL TUBE-PLA12 >
Browning® 1073881 Type F Q-D® Bushing, 2-1/2 in Dia Bore, 4-3/8 in Dia Barrel, 6-5/8 in Dia Flange, 3.68 in OAL, Steel
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
