Gates® Power Transmission PowerGrip® GT®2 P32-14MGT-55 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5.507 in OD, 32 Grooves, 5.614 in Dia Pitch, 2.81 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
-
BrandGates® Power Transmission
-
UPC72053459876
-
Manufacturer Part NumberP32-14MGT-55
-
CountryUSA|Canada
-
Face Width2.81 in
-
Bushing Type2517
-
Pitch14 mm
-
Pitch Diameter5.614 in
-
MaterialCast Iron
-
Flange Diameter6.13 in
-
Series7711
-
Hub Diameter3.92 in
-
Number of Grooves32
-
Outside Diameter5.507 in
-
Bore Diameter1/2 to 2-11/16 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With55 mm W PowerGrip® GT®3 and PowerGrip® GT®2 Belts
- Full split in bushing allows easy installation and removal
- Precise sprocket design produces positive, press fit to shaft
- Precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77115032
-
UNSPSC31171900
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Full Engineering Drawing
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® GT®2 P32-14MGT-55 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5.507 in OD, 32 Grooves, 5.614 in Dia Pitch, 2.81 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
United Abrasives-SAIT 70060 2A Premium Coated Flap Wheel, 2-1/2 in Dia, 1/2 in W Face, 1/4 in Dia Shank, 60 Grit, Medium Grade, Aluminum Oxide Abrasive
BANDED V-BELT-JAS12RB115>
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
3/4" DIAMETERX3-1/2" SHOULDER BOLT-HOL08140 >
PROJECTOR BULBS
