Gates® Power Transmission PowerGrip® GT®2 P56-8MGT-20 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 5.56 in OD, 56 Grooves, 5.614 in Dia Pitch, 1.11 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
-
BrandGates® Power Transmission
-
UPC72053458794
-
Manufacturer Part NumberP56-8MGT-20
-
CountryUSA|Canada
-
Face Width1.11 in
-
Bushing Type2012
-
Pitch8 mm
-
Pitch Diameter5.614 in
-
MaterialDuctile Iron
-
Flange Diameter5.95 in
-
Series7708
-
Hub Diameter4.38 in
-
Number of Grooves56
-
Outside Diameter5.56 in
-
Bore Diameter1/2 to 2-1/8 in
-
Bore TypeTaper-Lock®
-
Overall Length1-1/4 in
-
Suitable For Use With20 mm W PowerGrip® GT®3 and PowerGrip® GT®2 Belts
- Full split in bushing allows easy installation and removal
- Precise sprocket design produces positive, press fit to shaft
- Precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77082056
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® GT®2 P56-8MGT-20 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 5.56 in OD, 56 Grooves, 5.614 in Dia Pitch, 1.11 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
#22-18" NYLON RING TERMINAL--PK/100-PENR6A10C >
X L-PITCHX28" TIMING BELT-JAS280XL015 >
8-MM-PITCHX1328-MM TIMING BELT-JAS13288M50 >
65_100x100.jpg)
722249 DO-IT-BEST/MIDWEST AIR TECH 3" X 15" RED STEEL SCREW-IN EARTH ANCHOR
SCREW INTO THE GROUND TO HOLD DOWN TENTS, CANOPIES, STORAGE BUILDINGS, FENCING, PLAYGROUND EQUIPMENT, TREES, PLANES, AS WELL AS HUNDREDS OF OTHER USES. NOT FOR USE ON MANUFACTURED HOMES, REFER TO MANUFACTURED HOME ANCHORS AND ACCESSORIES
WH722249>
SPIRAL LACQUERED SPRING STEEL COMB. TEETH ON 1 SIDE ARE SMOOTHLY ROUNDED FOR THIN COATED ANIMALS, FOR OTHERS ARE THE PITCH TYPE SHARP TEETH FOR THICK OR SHEDDING COATS. THE SPIRAL IS CONSTRUCTED OF 1 CONTINUOUS STRIP OF QUALITY SPRING STEEL COMBINING FLEXIBILITY WITH STRENGTH. COMBS ARE ASSEMBLED WITH LEATHER SPACERS AND RIVETED TOGETHER. A TENSION SPRING SNUGS THE COMB FIRMLY ON THE METAL SHANK PIN. COMBS ARE LACQUER-DIPPED TO GIVE THEM A BRIGHT DURABLE FINISH.
- JWH752938>
