Gates® Power Transmission Poly Chain® GT®2 14MX-31S-20 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 5.33 in OD, 31 Grooves, 5.439 in Dia Pitch, 1.36 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053271621
-
Manufacturer Part Number14MX-31S-20
-
CountryUSA|Canada
-
Face Width1.36 in
-
Bushing Type2012
-
Pitch14 mm
-
Pitch Diameter5.439 in
-
MaterialCast Iron
-
Flange Diameter6.11 in
-
Series7719
-
Hub Diameter4.22 in
-
Number of Grooves31
-
Outside Diameter5.33 in
-
Bore Diameter1/2 to 2-1/8 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With20 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77192031
-
UNSPSC31171900
-
Package DescriptionEACH
-
Catalog
-
Full Engineering Drawing
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 14MX-31S-20 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 5.33 in OD, 31 Grooves, 5.439 in Dia Pitch, 1.36 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
1-1/8" -ID 2-BOLT FLANGE UNIT-FYHNANFL20618 >
ACETYLENE 2" X 4" 1/4" LENS SHADE #5-FOR30233 >
Weiler® 21113 Power Tube Brush, 7/8 in Dia x 2-1/2 in L, 5-1/2 in OAL, 0.0104 in Dia Filament/Wire, Steel Fill
Weiler® 21113 Power Tube Brush, 7/8 in Dia x 2-1/2 in L, 5-1/2 in OAL, 0.0104 in Dia Filament/Wire, Steel Fill
POLY-V V-BELT-JAS540L8>
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS18008M40 >
