Gates® Power Transmission Poly Chain® GT®2 8MX-37S-21 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.646 in OD, 37 Grooves, 3.709 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC072053824391
-
Manufacturer Part Number8MX-37S-21
-
CountryUSA
-
Face Width1.2 in
-
Bushing Type1610
-
Pitch8 mm
-
Pitch Diameter3.709 in
-
MaterialDuctile Iron
-
Flange Diameter4.04 in
-
Series7718
-
Hub Diameter2.95 in
-
Number of Grooves37
-
Outside Diameter3.646 in
-
Bore Diameter1/2 to 1-11/16 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With21 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77182037
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-37S-21 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.646 in OD, 37 Grooves, 3.709 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Law® LW2 Series Soft Secure TPR Nose Piece Soft TPR Temple Inserts Extremely Lightweight, 21.3 grams These dielectric safety glasses contain no metal This lightweight and fashionable wrap-around lens design offers an excellent orbital seal and a higher level of protection from side impacts due to its greater coverage area. TPR temple inserts that enhance grip and comfort are included on all styles. This series is a dielectric option, meaning the eyewear has no metal pieces. Its lightweight design makes the LW2 a good choice for long term and comfortable wear. Choose the best safety glasses, choose MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
Gates® Power Transmission PowerGrip® GT®2 P36-8MGT-30 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.555 in OD, 36 Grooves, 3.609 in Dia Pitch, 1.48 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Gates® Power Transmission Poly Chain® GT®2 8MX-80S-62 Synchronous Sprocket, 7/8 to 3-1/4 in Taper-Lock® Bore, 7.96 in OD, 80 Grooves, 8.02 in Dia Pitch, 2.91 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission Poly Chain® GT®2 8MX-71S-62 Synchronous Sprocket, 7/8 to 3-1/4 in Taper-Lock® Bore, 7.06 in OD, 71 Grooves, 7.118 in Dia Pitch, 2.91 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission Poly Chain® GT®2 8MX-35S-21 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.446 in OD, 35 Grooves, 3.509 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
