Gates® Power Transmission PowerGrip® GT®2 P34-8MGT-30 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.355 in OD, 34 Grooves, 3.409 in Dia Pitch, 1.51 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
-
BrandGates® Power Transmission
-
UPC72053458909
-
Manufacturer Part NumberP34-8MGT-30
-
CountryUSA|Canada
-
Face Width1.51 in
-
Bushing Type1610
-
Pitch8 mm
-
Pitch Diameter3.409 in
-
MaterialDuctile Iron
-
Flange Diameter3.82 in
-
Series7708
-
Hub Diameter2.29 in
-
Number of Grooves34
-
Outside Diameter3.355 in
-
Bore Diameter1/2 to 1-11/16 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With30 mm W PowerGrip® GT®3 and PowerGrip® GT®2 Belts
- Full split in bushing allows easy installation and removal
- Precise sprocket design produces positive, press fit to shaft
- Precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77083034
-
UNSPSC31171900
-
Package DescriptionEACH
-
Catalog
-
Full Engineering Drawing
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® GT®2 P34-8MGT-30 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.355 in OD, 34 Grooves, 3.409 in Dia Pitch, 1.51 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Crescent® 03896N Flat File, 14 in L, Double/Single/Second Cut
Gates® Power Transmission PowerGrip® GT®2 P80-8MGT-30 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 7.966 in OD, 80 Grooves, 8.02 in Dia Pitch, 1.49 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
12" FULL LENGTH SCREW C-CLAMP
Browning® 1076918 QD Bushing, 1 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.33 in OAL, Ductile Iron
Browning® 1076918 QD Bushing, 1 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.33 in OAL, Ductile Iron
Gates® Power Transmission Poly Chain® GT®2 14MX-71S-37 Synchronous Sprocket, 1-3/16 to 3-15/16 in Taper-Lock® Bore, 12.35 in OD, 71 Grooves, 12.457 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
