Gates® Power Transmission Poly Chain® GT®2 8MX-30S-21 Synchronous Sprocket, 1/2 to 1-1/8 in Taper-Lock® Bore, 2.945 in OD, 30 Grooves, 3.008 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC072053270945
-
Manufacturer Part Number8MX-30S-21
-
CountryUSA
-
Face Width1.2 in
-
Bushing Type1108
-
Pitch8 mm
-
Pitch Diameter3.008 in
-
MaterialSteel
-
Flange Diameter3.41 in
-
Series7718
-
Hub Diameter2.38 in
-
Number of Grooves30
-
Outside Diameter2.945 in
-
Bore Diameter1/2 to 1-1/8 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With21 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77182030
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-30S-21 Synchronous Sprocket, 1/2 to 1-1/8 in Taper-Lock® Bore, 2.945 in OD, 30 Grooves, 3.008 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission PowerGrip® GT®2 P80-8MGT-30 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 7.966 in OD, 80 Grooves, 8.02 in Dia Pitch, 1.49 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
MCR Safety PA112AF Plasma® Lightweight Safety Glasses, Duramass® Anti-Fog, Gray Lens, Wrap Around Frame, Black, Polycarbonate Frame, ANSI Z87+
MCR Safety PA112AF Plasma® Lightweight Safety Glasses, Duramass® Anti-Fog, Gray Lens, Wrap Around Frame, Black, Polycarbonate Frame, ANSI Z87+
MCR Safety ST112AF Storm® Plus Single Lens Safety Glasses, Duramass® Anti-Fog, Gray Lens, Half-Frame Frame, Black, Nylon Frame, Polycarbonate Lens, ANSI Z87+, CE EN 166, CAN/CSA Z94.3
MCR Safety ST112AF Storm® Plus Single Lens Safety Glasses, Duramass® Anti-Fog, Gray Lens, Half-Frame Frame, Black, Nylon Frame, Polycarbonate Lens, ANSI Z87+, CE EN 166, CAN/CSA Z94.3
Gates® Power Transmission PowerGrip® GT®2 P34-8MGT-30 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.355 in OD, 34 Grooves, 3.409 in Dia Pitch, 1.51 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Gates® Power Transmission PowerGrip® GT®2 P23-8MGT-12 Synchronous Sprocket, 1/2 to 1 in Taper-Lock® Bore, 2-1/4 in OD, 23 Grooves, 2.306 in Dia Pitch, 0.88 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
