Gates® Power Transmission Poly Chain® GT®2 8MX-32S-21 Synchronous Sprocket, 1/2 to 1-1/4 in Taper-Lock® Bore, 3.145 in OD, 32 Grooves, 3.208 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC072053270952
-
Manufacturer Part Number8MX-32S-21
-
CountryUSA
-
Face Width1.2 in
-
Bushing Type1210
-
Pitch8 mm
-
Pitch Diameter3.208 in
-
MaterialDuctile Iron
-
Flange Diameter3.61 in
-
Series7718
-
Hub Diameter2.28 in
-
Number of Grooves32
-
Outside Diameter3.145 in
-
Bore Diameter1/2 to 1-1/4 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With21 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77182032
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-32S-21 Synchronous Sprocket, 1/2 to 1-1/4 in Taper-Lock® Bore, 3.145 in OD, 32 Grooves, 3.208 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
MCR Safety CK114 Checkmate® Value Safety Glasses, Duramass® Hard Coat, Amber Lens, Frameless Frame, Polycarbonate Frame, ANSI Z87+
MCR Safety CK114 Checkmate® Value Safety Glasses, Duramass® Hard Coat, Amber Lens, Frameless Frame, Polycarbonate Frame, ANSI Z87+
Gates® Power Transmission Poly Chain® GT®2 8MX-48S-12 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.749 in OD, 48 Grooves, 4.812 in Dia Pitch, 0.85 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
MCR Safety ST130 Storm® Plus Single Lens Safety Glasses, Duramass® Hard Coat, Clear Lens, Half-Frame Frame, Red, Nylon Frame, Polycarbonate Lens, ANSI Z87+, CE EN 166, CAN/CSA Z94.3
ST1 Series Safety Glasses with Ratcheting Temples Soft Non-Slip Temple Grips Single wraparound dual focal point lens 5 position adjustable ratcheting temples for better fit Workers wearing the ST1 eyewear can expect extreme comfort with this face-flattering protective eyewear from MCR Safety. Ratchet action temples combined with non-slip rubber head grips create a customized fit for virtually any head size. The wraparound lens is constructed of lightweight, scratch-resistant polycarbonate that filters 99.9% of UV rays and delivers advanced visual acuity and protection. This product meets the ANSI/ISEA Z87.1-2025 standard.
Gates® Power Transmission Poly Chain® GT®2 8MX-48S-21 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.749 in OD, 48 Grooves, 4.812 in Dia Pitch, 1-1/4 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission PowerGrip® GT®2 P42-8MGT-30 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.16 in OD, 42 Grooves, 4.211 in Dia Pitch, 1-1/2 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
