Gates® Power Transmission Poly Chain® GT®2 8MX-32S-12 Synchronous Sprocket, 1/2 to 1-1/4 in Taper-Lock® Bore, 3.145 in OD, 32 Grooves, 3.208 in Dia Pitch, 1 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053270556
-
Manufacturer Part Number8MX-32S-12
-
CountryUSA|Canada
-
Face Width1 in
-
Bushing Type1210
-
Pitch8 mm
-
Pitch Diameter3.208 in
-
MaterialDuctile Iron
-
Flange Diameter3.61 in
-
Series7718
-
Number of Grooves32
-
Outside Diameter3.145 in
-
Bore Diameter1/2 to 1-1/4 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With12 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77181032
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-32S-12 Synchronous Sprocket, 1/2 to 1-1/4 in Taper-Lock® Bore, 3.145 in OD, 32 Grooves, 3.208 in Dia Pitch, 1 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
United Abrasives-SAIT 1AX Quick Ship™ 60132 Semi-Friable Coated Abrasive Belt, 3/4 in W x 20-1/2 in L, 80 Grit, Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
ALFAGOMMA® T605AA300X100 T605AA Brewery Hose, Hose End Style, 100 ft L, 150 psi Working, Import
24 TIE OFF STRAP-FRE1324 >
Dichtomatik N70354 O-Ring, 354 Dash Number, 5.1 in ID x 5.52 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
8-MM X 1.00X45-MM HEX HEAD CAPSCREW-MET96008045F >
