Gates® Power Transmission Metric-Power™ XPA2282 Heavy Duty Molded Notch V-Belt, XPA Section, 13 mm W Top, 2298 mm L Outside, 10 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
-
BrandGates® Power Transmission
-
UPC072053691092
-
Manufacturer Part NumberXPA2282
-
CountryUSA|Canada
-
Temperature Range-70 to 250 deg F
-
Thickness10 mm
-
MaterialEPDM
-
Top Width13 mm
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Section SizeXPA
-
Series9420
-
Number of Ribs1
-
Outside Length2298 mm
- Flex-bonded cords are chemically bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Proprietary construction features an unbeatable combination of flex and load carrying capacity, reduced stretch and incredible cord adhesion properties
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
- Molded notches reduce thermal and bending stresses
-
Alternative Part Number942012282
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Metric-Power™ XPA2282 Heavy Duty Molded Notch V-Belt, XPA Section, 13 mm W Top, 2298 mm L Outside, 10 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
PW-67 KEROSENE HEATER REPLACEMENT WICK FIT MOST ALL HEATERS. A CROSS REFERENCE, CHART AND INSTALLATION GAUGE ENCLOSED IN EACH PACKAGE-JWH427837 >
Gates® Power Transmission Super HC® PowerBand® 4/3V710 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 71 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Browning® Classical Gripbelt® 1025824 AK Series Type 1 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 2 in OD, 2 in (A)/1.46 in (3L) Dia Pitch, 21/32 in W Face
Gates® Power Transmission PowerGrip® 465H075 Heavy Timing Belt, 3/4 in W, 46-1/2 in OAL, 1/2 in Pitch, 93 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
