Gates® Power Transmission Metric-Power™ XPA1500 Heavy Duty Molded Notch V-Belt, XPA Section, 13 mm W Top, 1517 mm L Outside, 10 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
-
BrandGates® Power Transmission
-
UPC72053691917
-
Manufacturer Part NumberXPA1500
-
CountryUSA|Canada
-
Temperature Range-70 to 250 deg F
-
Thickness10 mm
-
MaterialEPDM
-
Top Width13 mm
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Section SizeXPA
-
Series9420
-
Number of Ribs1
-
Outside Length1517 mm
- Flex-bonded cords are chemically bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Proprietary construction features an unbeatable combination of flex and load carrying capacity, reduced stretch and incredible cord adhesion properties
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
- Molded notches reduce thermal and bending stresses
-
Alternative Part Number942011500
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Metric-Power™ XPA1500 Heavy Duty Molded Notch V-Belt, XPA Section, 13 mm W Top, 1517 mm L Outside, 10 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Browning® Classical Gripbelt® 1028034 BK Series Type 2 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 3.35 in OD, 2.8 in (A)/3.3 in (B) Dia Pitch, 13/16 in W Face
IDC Select® IDC BK034-1/2 Light Duty Type 2 Single Groove Sheave With Setscrew, Bored to Size Bore, 1/2 in Dia Bore, 3.55 in OD, 3.2 in Dia Pitch, 7/8 in W Face
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
Milwaukee® 4209-1 Adjustable Position Heavy Duty Electromagnetic Drill Press, 1-1/4 in Chuck, 2 hp, 5-3/32 in Drill to Center From Base, 750/375 rpm Spindle Speed, 120 V AC
This combination unit features the 4203 adjustable position, variable speed base and the 4292-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
