Gates V-BELTS GAT 5-V-2240
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC072053290912
-
Manufacturer Part Number5V2240
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness35/64 in
-
MaterialChloroprene
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
ColorBlack
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section Size5V
-
Number of Ribs1
-
Outside Length224 in
-
Series9334
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- TB Wood's® Narrow Ultra-V belts are static conducting, oil and heat resistant
-
UNSPSC26111801
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Alternative Part Number93342240
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Browning® Classical Gripbelt® 1025923 AK Series Type 1 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.2 in OD, 2.2 in (A)/1.66 in (3L) Dia Pitch, 21/32 in W Face
Lincoln® 90464 Straight Oil Meter Swivel, 1/2 in Nominal, NPT Male x NPT Female
Lincoln® 90464 Straight Oil Meter Swivel, 1/2 in Nominal, NPT Male x NPT Female
Morse CTR1208MC1 (405232), 12" x 8TPI, carbide tipped reciprocating saw blade is designed for metal and hard, abrasive cutting applications that traditional blades can't cut. Precision ground tooth profile optimizes performance in metal applications of 3/8" and thicker, as well as abrasive applications between 3/16" and 1/2". Heavy duty blade body provides rigidity under heavier feed pressure. One (1) blades per pack.
3/8" X 6" STAINLESS STEEL NIPPLE-FIT3/8X6SSN >
OIL FILTERS
