Gates® Power Transmission Super HC® PowerBand® 4/8V1320 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 132 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053279078
-
Manufacturer Part Number4/8V1320
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness7/8 in
-
MaterialChloroprene
-
Top Width1 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter15.916 in
-
Section Size8V
-
Series9387
-
Number of Ribs4
-
Outside Length132 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93874132
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 4/8V1320 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 132 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
15/16"-ID HIGH PILLOW BLOCK UNIT - FYHNAP20515>
Browning® Classical Gripbelt® 3693678 B5V® Solid Type 1 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 6.28 in OD, 5.8 in (A)/6.3 in (B)/6.1 in (BV) Dia Pitch, 1 in W Face
4-MIL NO-PWDR NITRILE GLOVE-BX/100-GLV6001XS>
4 X 5 BLACK NIPPLE
2-1/2" CAM FOLLOWER-MCGCF21/2SB >

