Gates® Power Transmission Super HC® 8V2120 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 212 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053016666
-
Manufacturer Part Number8V2120
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness7/8 in
-
MaterialChloroprene
-
Top Width1 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter15.916 in
-
Section Size8V
-
Series9336
-
Number of Ribs1
-
Outside Length212 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number93362120
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Super HC® 8V2120 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 212 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Gates® Power Transmission Super HC® Molded Notch PowerBand® 10/5VX1600 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 160 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Dottie® 7007 Zinc Rich Cold Galvanize Coating, 16 oz Container, Gray, 48 sq-ft Coverage, 24 hr Curing
Dottie® 7007 Zinc Rich Cold Galvanize Coating, 16 oz Container, Gray, 48 sq-ft Coverage, 24 hr Curing
Gates® Power Transmission Super HC® 8V1600 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 160 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
JET® Bolt Cutters incorporate high-carbon alloy tool steel jaws for cutting concrete-reinforcing rods, medium tensile and soft bolts, rods, rivets, bars and chains. JET Bolt Cutters all steel handles with rubber grips are angled for maximum leverage. JET Bolt Cutters comply with Federal Specification No. GGG-C-740d Type II
Dodge® 131132 212 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 2-1/4 in Dia Bore, 5.63 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 6.88 in OAL/Dia
Dodge® 131132 212 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 2-1/4 in Dia Bore, 5.63 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 6.88 in OAL/Dia
